VVDI MB BGA TOOL

[ghostrider72]

Hi guys
Does anyone done SLK 2006 AKL? Cant find R171 in menu.
Regards

[Brat]

Someone have problem to write data in unlocket esl nec after success remove fatall error in w204? When i try to write data always error to write,read is good.
i finish job with emu,but i interes have someone same problem in paste with write data in unlocked esl nec?

[daxxer]

Hi guys
Does anyone done SLK 2006 AKL? Cant find R171 in menu.
Regards

its W211 eis

[ghostrider72]

Thank you mate

[jacostanzo]

Someone have problem to write data in unlocket esl nec after success remove fatall error in w204? When i try to write data always error to write,read is good.
i finish job with emu,but i interes have someone same problem in paste with write data in unlocked esl nec?

Yes, I also have that problem more than once, the unlock procedure damaged the NEC

[Brat]

Thank you!

[lagaffe]

Hello,
Esl w245 can it be renew and personalized with vvdi mb tool? can somone provide pinout for bench test eis/elv?
Regards

[koolstuff]

Hello,
Esl w245 can it be renew and personalized with vvdi mb tool? can somone provide pinout for bench test eis/elv?
Regards

yes if you know the EIS erase pass and key password it can be done.

[solitaire]

Post deleted....

[drugowaz]

killed w216 2009 yesterday, spare key,in second step data aquisition when asked put ori key it vvdi,got error 36 or 32,car dead no ignition,vvdi killed the key when reading data from it. did diag,live etc,eis good,no errors,key out of sync and not recognizable anymore. nec rom08.
can send log to support due to thei stupid form,adding here.

[daxxer]

killed w216 2009 yesterday, spare key,in second step data aquisition when asked put ori key it vvdi,got error 36 or 32,car dead no ignition,vvdi killed the key when reading data from it. did diag,live etc,eis good,no errors,key out of sync and not recognizable anymore. nec rom08.
can send log to support due to thei stupid form,adding here.

why complaining ?? its your first benz in your live ??
standard step, nothing new...choose another step and finish the job
then reprogram key with new dump and all will be okey... no need complain bcs operator surprised and dont know what to do now

[Maartinj]

can send log to support due to thei stupid form,adding here.

yes, I see , 4 logs from one operation ( one = 0kb - wonder what message contain, another 1kb - hmm... seems only from start MB , another 2 each 60kb )
You are a king of your castle with 24/7 service and 5min awaiting time for replay and 30min awaiting time for engineer ?
on the way

[drugowaz]

why complaining ?? its your first benz in your live ??
standard step, nothing new...choose another step and finish the job
then reprogram key with new dump and all will be okey... no need complain bcs operator surprised and dont know what to do now

What are you talking about. Vvdi mb killed the key irreturnable. Imposible to synch or renew with any adapter and other tools to. Nec corupted. I bought used key from other car renewed it and added .
Had to dissable dash remove eis and make AKL . To get pass.
Tried all ways before this .nothing helped.
No its not my furst mb. Even not first keyless its same as w221 ive done them. I dont wanna hear bullshit operator error etc. Its not the case.
Error on ori key 1004 read failed. It reads by IR but not renew it with adapters.
Martin about logs i dont know exacly which one. As after brick ive dine few other manipulations so aded few logs.

To resync manualy hold in eis . In out etc not worked.
With car and eis all good 100% . So fact that key was killed.

About support xh i dont expect imediately response or teamview asap. As last time i asked they responded after 3 or 4 days. This is uselles.

I added logs that maybe later they pay atention to what hapened and fix.

[lockLV]

VVDI MB 4.5.0 can't read w202, w208, w210 EIS cpu information with k-line, password calculation - OK

[autoTkey]

drugowaz - it is also possible that the key had some problem and died after the operation.