Toyota "G" and remote function dongle

**Kinskeys** · 2nd November, 2015, 11:57 PM

Originally Posted by ray-ray

What the trick? Can it be done with the "Pro" ? These will help all USA member save time. Are you willing to share your info.

will ilco/AD be adding these to there tool?

Ray I can't say what it is because I'm working with AD to get it onto a MVP @ the moment

**indienick** · 4th November, 2015, 02:05 AM

Borrowing technology from Tango and feeding to AD?

**indienick** · 4th November, 2015, 02:12 AM

I like how the video shows how fast the service is, but you had already taken time to arrange your laptop, load your software, cut your key, program your remote (I know the remote + transponder is two separate procedures for this car, but your video makes it seem as if they are programmed together), determine the car takes G chip.

"done in 5 minutes".

oooookkkkkkk

do not get me wrong, the immo quick reset is cool but let's keep it real here my friend.

**ray-ray** · 4th November, 2015, 04:08 AM

Only a Rookie would have not notice the remote section. AD need to keep the "PRO" held of the "MVP" (Pro was the foundation to the Company) (MVP are just leasing space on are foundation).
so soon qwick reset for "G" and "H" so how about bypass Nissan 20 digit (taken from zed full)?

**indienick** · 4th November, 2015, 09:59 PM

Ordered a remote dongle. Will post results soon as I have them. Interesting item....

**austingreen** · 2nd December, 2015, 04:24 AM

Originally Posted by indienick

Ordered a remote dongle. Will post results soon as I have them. Interesting item....

Hi, indienick, I guess you received your remote dongle, right? how about it? would you please post here the results?

**ray-ray** · 2nd December, 2015, 05:11 AM

I order 2 myself will post USA market cars on Tuesday.

**Chuckk** · 11th December, 2015, 06:57 AM

Originally Posted by ray-ray

I order 2 myself will post USA market cars on Tuesday.

Have you figured it out ? It would be interesting to test it out with the H key as well.

**indienick** · 11th December, 2015, 04:03 PM

Originally Posted by austingreen

Hi, indienick, I guess you received your remote dongle, right? how about it? would you please post here the results?

Thanks, sorry I did not reply back until now. I had not been on DK in a while.

It works perfectly fine. I had not used it until now to do immo but remote programming works as advertised. Very simple. Tested on Toyota Highlander and Toyota Rav4 until now.
Separate key and remote on these cars that I tested.

**Automat** · 11th December, 2015, 09:31 PM

What years did you test Indie?

**austingreen** · 15th December, 2015, 04:11 AM

Originally Posted by indienick

Thanks, sorry I did not reply back until now. I had not been on DK in a while.

It works perfectly fine. I had not used it until now to do immo but remote programming works as advertised. Very simple. Tested on Toyota Highlander and Toyota Rav4 until now.
Separate key and remote on these cars that I tested.

That's fine. Wait for your more tested result.

**ray-ray** · 16th December, 2015, 05:10 AM

Remote section works perfect no problem tested on a 2009, 11, 15 Camry , RAV4 , Prius C
tryied to add the G but did not work. ( the tool did go through it cycle and the immo light did go solid )
i think I was missing a step. It ask you close the door and turn key then connect to the obd2. A couple of beeps
Later the next thing the immo. Light goes solid , you remove the master and insert the add key to the ignition. Light goes back to blinking. Next time I will try it with the door open.

**austingreen** · 21st December, 2015, 04:14 AM

Originally Posted by ray-ray

Remote section works perfect no problem tested on a 2009, 11, 15 Camry , RAV4 , Prius C
tryied to add the G but did not work. ( the tool did go through it cycle and the immo light did go solid )
i think I was missing a step. It ask you close the door and turn key then connect to the obd2. A couple of beeps
Later the next thing the immo. Light goes solid , you remove the master and insert the add key to the ignition. Light goes back to blinking. Next time I will try it with the door open.

So problem solved now?

**toyboy123** · 28th April, 2017, 01:02 AM

i picked up one of the green OBDII dongles and tried it today on an '09 yaris made in japan for north america.
works perfect.i programmed the transponder chip (dot 4d67) and tried to reprogram the original key fob and it worked fine.
the new key had no fob on it.i had another fob remote but it would not program--i'm sure the key is bad (jobber).