WARNING !!!! Do not buy XHORSE devices !!!!

[carmansk]

WARNING !!!! Do not buy XHORSE devices !!!! The MQB function is broken !!!! XHORSE = BIG SH..T !!!!

[brend]

Explane please , what exactly in the mqb is broken and which one devise you mean ?

[carmansk]

Bez názvu.jpg

Xhorse devices doesn't support obtain this data now, sorry. Maybe it will upgrade in the future.

[Spiritech]

Maybe settle down a bit fella. I've used the MQB AKL function several times now on V850E2 based dashboards and had absolutely no issues outside of the first dash where it was unclear which diagram to use and I asked Maartinj here which was the correct one and he advised me. This is a high risk procedure and you are told before the attempt to read, you must be ABSOLUTELY certain of the points before performing the read as the procedure used is not 100% safe if you have not followed the instructions, just like the BCM2 procedure before it. So far I've had zero failures, and other than buying in the sync data it's cost me nothing other than the initial licence.

[carmansk]

and you will say to me, Friend, that I am an idiot, I have been solving it with XHORSE for two days now. function no synchronization with the server is possible

[sv2hqx]

and you will say to me, Friend, that I am an idiot, I have been solving it with XHORSE for two days now. function no synchronization with the server is possible

so what ...
i tried golf7 mqb with autel
error ...need to wait 999h...try again....after contacting with support ,,,they say will update in the future
what it means????????????????
autel is not good????
you try 4-5 functions and decide vvdi is no good??

[Manta1600]

and you will say to me, Friend, that I am an idiot, I have been solving it with XHORSE for two days now. function no synchronization with the server is possible

Mate XHorse is much more than MQB AKL so if you aren't happy with your tool just trough it on the bin

and let we decide what to do with ours

[rapidlocksmiths]

wow so much anger , and when some thing fails the tool is shit , always the tool is shit .

did you buy this tool just for mqb ? if so then you will never use it to its full potential , yes like all tools it has its fails but also has its wins too .

if you hate it that much , return it or sell it on and buy different tool

[carmansk]

so if i understand correctly you are throwing £2000 in the bin by default? and secondly, I do not convince anyone, I inform !!!
)

[cristo_844]

No, it's no shit... Is was it's faults but is a very good tool for the price!

[Manta1600]

so if i understand correctly you are throwing £2000 in the bin by default? and secondly, I do not convince anyone, I inform !!!
)

Yes if you don't know for what can use it throw in the bin

[fred77]

These sorta guys who moan are normally startups with little experience, and even less money and work

expect some of us have been like this in early days
now even more pressure in crowded market -frustration overboils to forum postings!

[rob h]

Not all function work well on the Tab. Vvdi2 is better.

I needed a Mb tool. And bought this tab, instead off the MB xhorse tool.
It does have so good features, but needs some work.

Only, if you test, and compare the same function with tab, and vvdi2. Or compare it to Avdi. Then your post will have more meaning.

[carmansk]

Títo chlapíci, ktorí nariekajú, sú zvyčajne začínajúci ľudia s malými skúsenosťami a ešte menej peňazí a práce

očakávajú, že niektorí z nás boli v začiatkoch takto vystavení,
teraz ešte väčší tlak na preplnenom trhu - frustrácia prekypuje príspevky na fórach!

no my friend you are not right ! I have been in the industry for 24 years ! And the only thing that frustrates me is messages like yours . to make an idiot out of everyone at any cost and to beat him up. I wish you a nice day, lots of health and happiness, as well as your whole family .