Ren Clio 2001 1.5 DCI ECU Delphi DDCR 8200180595 - Virginize please

**psam** · 24th May, 2016, 12:36 PM

Hi,

Can someone help me virginize this file:

Ren Clio 2001 1.5 DCI ECU Delphi DDCR 8200180595

Thank you so much.

BR,
PM.

RenaultClio2001_ECU_Delphi_AT25080_used.rar

**dragon100** · 24th May, 2016, 12:41 PM

Hi, try and report , if ok, please reputation+thanks.

**psam** · 24th May, 2016, 12:46 PM

Originally Posted by dragon100

Hi, try and report , if ok, please reputation+thanks.

Thank you so mcuh.
I'll try and report.

**psam** · 24th May, 2016, 01:05 PM

Originally Posted by psam

Thank you so mcuh.
I'll try and report.

Didn't worked. Car don't start. Still immo line error.
Any other idea?

**dragon100** · 24th May, 2016, 01:13 PM

Try this and report.

**psam** · 24th May, 2016, 02:17 PM

Originally Posted by dragon100

Try this and report.

Sorry to bother you again.
Still not starting... no DTCs on ECU this time (with the other version, I had a relay error...).
However immo line still active.
Please note that the UCH is the original one and the ECU it's used. That's why I want to adapt it to the old UCH.
I coded the injectors.

Thanks and waiting.

**albertros** · 25th May, 2016, 11:29 AM

Hi
you need to make sure you get the right part number. Many ecu look the same but they dont take every injector number. With / without aircon may make a difference, it does on the Kangoo anyway. Then delete the first 2 lines in the eeprom. (ff ff ff ..)
The car should start but not rev up untill you enter good inj codes.
Its also helfull to report what the red led is doing,
good luck.

**psam** · 25th May, 2016, 02:01 PM

Originally Posted by albertros

Hi
you need to make sure you get the right part number. Many ecu look the same but they dont take every injector number. With / without aircon may make a difference, it does on the Kangoo anyway. Then delete the first 2 lines in the eeprom. (ff ff ff ..)
The car should start but not rev up untill you enter good inj codes.
Its also helfull to report what the red led is doing,
good luck.

Thanks for your help and comments.
The ECU seems to accept the injectors codes perfect. It allows me to program them and after that the DTC disapears.
Concerning the immo light, it turns off normally, as the UCH recognizes the key. Both of them are the original ones.
However, I think the code sent to the ECU isn't the right one and I always get an error (DTC) regarding immo on immoblizer.

The motor cranks perfect, but still refuses to start...
Immo off, woulb be a better option?

PLEASE HELP!
Thanks.