OBDSTAR F108 PSA PIN CODE Reading and Key Programming Tool for Peugeot/Citroen/DS

[Duracell2]

3) I plug on OBD2 and F108+ sniffing "kwp fast"traffic , i turn ignition "on/of" 10 times / 4 minutes

If so, then there should be no "killed devices" with this device

2004 C4 / this car is not CAN ! CAN protocol is after 2008 on PSA car , some user say NO HE CAN'T , but yes we can !

maybe few more samples with this older cars is required to be sure.

Thank you for sharing your testing results.

[TERMINATOR1000]

yes of course !
But i'm sure full chip PCB F108+ with last update can retrieve all PIN code , it's the same BSI for PSA ( Siemens , Valeo & J-C ) .
And if it's not FULL CHIP tool F108+ , CONNECTION BREAK DOWN , k-line is not operational .
Post your experience .
B.R

[Duracell2]

yes of course !
But i'm sure full chip PCB F108+ with last update can retrieve all PIN code , it's the same BSI for PSA ( Siemens , Valeo & J-C ) .
And if it's not FULL CHIP tool F108+ , CONNECTION BREAK DOWN , k-line is not operational .
Post your experience .
B.R

1) Can you post (or send) the latest firmware update or is it done online ?

2) I also noticed on seller's link: The device just can support the car after 2008 year and the car which is CAN Protocol.


WHy would they advertise it only as 2008+ (CAN compatible)

[TERMINATOR1000]

1) Update online only by micro SD card , 1 year free access after registration , serial number + dealer ID for registration : "OBDSTAR UpgradeTools"
2) FAKE NEWS , my report prouve that F108+ support "no-CAN" car before 2008 .... I'm suppose they advertise old F108 support the car after 2008 year and the car which is CAN Protocol
Many bad feedback on forum , i'm not OBDSTAR seller , but 1 test 1 PIN !
Sure for the other buyers of F108 without chip , it's sad , PCB is incomplet K-LINE is unplug ! no miracle ...

[TERMINATOR1000]

Hello
307 CAN > 2005
PIN CODE OK , 4/5 minute
Very best tool i ever see , sorry for first customers !
You can buy this tool with my benediction ( f108+ full chip + V31.20 ! )

[Duracell2]

you have to try it on Peugeot 406.
There is video on YT of using F108+ on Peugeot 406 and showing it can't read PIN

video here:
https://www.youtube.com/watch?v=jPKpNQsK20I&t=5s

[TERMINATOR1000]

Hello .
No tested on 406 is very old car ! 20 year ...
This tool is for car generation 307 407 C4 C3 and after
100% operational after 2005
BR

[truedetective]

Tried connecting directly to ECU lines?

[TERMINATOR1000]

no , just by OBD2 !

[TERMINATOR1000]

BIG discount !
118€ OBDSTAR F108 +

https://fr.aliexpress.com/item/OBDST...fdccf781&tpp=1

[Duracell2]

BIG discount !
118€ OBDSTAR F108 +

https://fr.aliexpress.com/item/OBDST...fdccf781&tpp=1

. discount is almost for 4 days now.
But I didn't want to tell you, so you don't feel bad, paying too much.
And I don't think it's a discount, it's the regular price now.

[TERMINATOR1000]

. discount is almost for 4 days now.
But I didn't want to tell you, so you don't feel bad, paying too much.
And I don't think it's a discount, it's the regular price now.

This tool works fine ! money it's secondary for me

[Duracell2]

This tool works fine ! money it's secondary for me

I have already ordered one too.
For that money, seems to be good tool.
Will report after it has arrived and done some tests.

[Duracell2]

Tool has arrived. As promised, here are test results.
Tested on PEUGEOT 307 , year 2006

Hardware check = OK

2.jpg


Reading PIN :

3.jpg

4.jpg

PIN reading OK.

HW: 4.02
SW: 06.18
P/C/DS ver: 31.20

[TERMINATOR1000]

The best tool provide by OBDstar , and key programming are 100% operational , very fast operation compare to DiagBox .
.... ridiculous price , tool rentabiliser after programming only two $ 6 Chinese key