I need cd recovery/ restore flash HW9.5
I need cd recovery/ restore flash HW9.5
aeryuruk (26th January, 2021), AGK (12th March, 2018), Donabe (18th May, 2020), dprs (10th January, 2021), ecuconnections (15th June, 2017), esk072 (1st November, 2022), fuicusilviu (16th February, 2022), GameTheoryOptimal (23rd July, 2016), jmalm (29th December, 2023), Pain84 (4th October, 2021), Pietrek (1st August, 2019), serikpay (5th March, 2024), Tomate (23rd October, 2019), vavrich (10th November, 2017)
This CD will work only in 1% cases,based on experience.You can try,worst case scenario is gray screen - bootloader failure.
If CCC just stopped working one day,you have a HW problem.
And no,heating the Intel flash chips will not be a permanent solution,it may extend its life for 1-2 months.
GameTheoryOptimal (23rd July, 2016), Michail1974 (20th October, 2017)
I can help you if you send me the motherboard.
You do not have the required tools / programmers to fully rebuild it.
Regards,
Sima
I have station rework BGA and programmer beeprog. do you have wiring diagram connect CCC to bench
Last edited by CarDiag84; 22nd July, 2016 at 04:05 PM.
CCC wakes up via Digital Ignition On via CAN (KL15).
You would need other modules also to wake it up and program it on bench.
GameTheoryOptimal (23rd July, 2016)
What module?
see: https://www.youtube.com/watch?v=L2RCX_wbOmE
He don't have any module
He has CAN bridge - he sends CAN wake up via PC.
buy 2 used modules...CAS / JBBE
find wiring diagram from online bmw wds and connect on bench...
Professional BMW immo solutions
Macedonia is one and GREEK!!!
Here is how to properly reflow the CCC
Sent from my iPhone using Tapatalk
I download file and burn CD and put CCC, but bootloader not start.
Stuck on bootloop for few days now on BMW logo and repeat.Shall i need to remove the damn CCC module and reflow and reflash-reprogram all the flash modules or specific ones?CCC module hw5.1 from 06 e91.
Bookmarks