rob h (20th January, 2017)
rob h (20th January, 2017)
I have big condor and tried downloading a version of the mini software but it still takes .u files... I removed the first 6 bytes from the file then it opens in the .u version.
Have you put the key as 4 track?
unless this has opened wrong...
Key should be channel track.
you have tip cuting at 5, this is 0.01mm so 5 is nothing, I woulld also have b on the first option set back like the top.
The flats should be 50 as per instacode.
Last edited by paul_12345; 21st January, 2017 at 10:56 AM.
Is cutting HU56 (Mitsubishi/Volvo) still not OK as it was mentioned on early pages?
MB Trucks / VW LT old model YM15 bug in SW.
1. Need add cutting depth 6x+
2. Cut key blade head about 2mm when cutter goes to other key side.
20170127_164500.jpg20170127_164443.jpg
If I helped you know what to do..
rm23 (2nd February, 2017)
31mm
Volvo HU56R cut depth must set -0.55mm then it's OK.
20170201_090301.jpg20170201_090251.jpg
Samic please fix issue:
1. Renault Key Card.
2. MB YM15.
3. Volvo HU56R.
Last edited by AndyCZ; 4th February, 2017 at 10:08 AM.
If I helped you know what to do..
rm23 (2nd February, 2017)
Keys in clamp A turn a bit whilest clamping them in.
Elevating the left side.
This will enhance this cutting depth, causing your problem.
Last edited by rob h; 2nd February, 2017 at 12:09 PM.
Plastic emergency keys is there a way to cut these. With condor.
Sent from my iPhone using Tapatalk
Add life to your days not days to your life
P
srec1503 (15th February, 2017)
Jobeso66 (16th October, 2017), Nassreddine84 (21st February, 2017), purdy (12th February, 2017)
I have a problem with the HON66 Keys......
Is it me or is it these Computerised machines?
If I duplicate a key it works perfect as long as the key wafers aren't worn out (These wafer are problematic).
However if I cut a key from numbers on wafer inside lock (No Master key available) then I end up with a problem. The problem is that it seems that the last row (tip of key) wafers are cut as per the second row. Thus starting from the left of the going to the right, I have to drop the wafer on most right and then shift all wafers 1 position forward and match the most LEFT wafer with something else.
If I remember this lock has 6 wafers on each side. I enter the numbers exactly as found in the lock but when it cuts then it cuts the key with all the wafers moved up 1 position. Thus the 6th wafer it cuts according to position 5 wafer's depth.
ACTUAL POSITIONS
ROW A ........ ROW B
1 = 3 ............1 = 3
2 = 4 ............2 = 2
3 = 4 ............3 = 2
4 = 3 ............4 = 3
5 = 2 ............5 = 4
6 = 1 ............6 = 1
When Cut
ROW A ........... ROW B
1 = ? ..............1 = ?
2 = 3 ..............2 = 3
3 = 4 ..............3 = 2
4 = 4 ..............4 = 2
5 = 3 ..............5 = 3
6 = 2 ..............6 = 4
This same problem I had on the X6 key cutting machine.........
Any solution? Did anybody else have the same problem?
Last edited by obeids; 12th February, 2017 at 11:01 AM.
And do not clamp plastic keys in with to much force!
purdy (12th February, 2017)
KeyData.rar
Hello Obeids,
Replace the file in your customkeytools with this file.
You can adapt the tickness, and internal with if neccasary.
And the shoulder, from position 1 to the keys head, is cut narrow.
You might not be able to do that with my file. So:
Precut a key, using the condors own hon66, A111111 b111111.
Then use the Hon66x key, and cut key.
Does your machine have the latest vesrion software?
Last edited by rob h; 12th February, 2017 at 12:22 PM.
Bookmarks