The cutting for the v0001-v5000 code series for the 10 cut keys hu100 is bad
The tip is wrong and the depths are wrong
Good thing I made a custom key file for the 10 cut
I have recently purchased an XC-mini, and I'm pleasantly surprised by it. Its much better than I was lead to believe!
Has the Renault keycard blade cutting been fixed, or is there a solution by making a custom file? It cuts the opening V incorrectly as mentioned earlier in this thread. I tried making a custom file, but dont know how to correct the opening V part of the key specification.
Also, is the custom file specification available anywhere ? It would encourage alternative software if this were available along with the communication specification over USB.
Thanks.
The cutting for the v0001-v5000 code series for the 10 cut keys hu100 is bad
The tip is wrong and the depths are wrong
Good thing I made a custom key file for the 10 cut
Jobeso66 (4th November, 2017)
kostas (3rd November, 2017)
Hi, thanks for your reply, but its not clear what you are saying.
"It is ready next update." It can mean the next update is now ready to download, or that the things I've asked for are in the next update, but it is not ready to download. Can you explain which it is please ?
I understand how to make a custom key file, your software is very good in that respect and as I described, I have done this. With my custom key file, the machine cuts the channel almost correctly, however, as I described the tip of the key where the opening V is cut, is not cut correctly. It has been described with photos in this thread earlier from post #399, though I only just read there is a universal copy tool, I'll try that but doesnt help if I need to cut the key to a lock I decoded. So needs to be fixed. Maybe have a couple of options in the software for how wide the V at the tip needs to be ?
And regarding the custom key file specification and the communication over USB ? Any chance that will be available to developers and interested parties soon ? That would certainly help people develop software compatible with your machine.
Thanks
Need some help tried to cut a key for 2013 VW CC also Passat 6B Believe is same key.
All keys are only plastic, my issues was everytime I have my machine xc007 trace key, the trace bit would snap, I never Seen that before, I snapped three trace bits in row.
Is there issue with machine? Or somejing xhorse knows about?
I did last big update, not sure if more updates where made since then.
Just trying to find out if anyone else’s experienced this issue.
Machine work with electric contact. On plastic key not have electric contact and tracer brake. All machines work like this.
Στάλθηκε από το F3311 μου χρησιμοποιώντας Tapatalk
Decode by eye if you have old key or by lishi if no key
Insert hu66 metal key
Input code you got
Start the machine so it calibrates on the metal key and just when it is about to start cutting
Press pause and pull out metal key blade and swap in plastic blade
press pause again to continue
This is how I do it
The problem with the machine in this case is you not knowing enough about how it works
BRMTDI (9th November, 2017)
madaxe (7th November, 2017)
autoTkey (7th November, 2017)
It doesn't check the height of the HU66 key. The first video what I found about it: https://www.youtube.com/watch?v=lSGS70bFEBo
Bookmarks