Jobeso66 (16th October, 2017)
Jobeso66 (16th October, 2017)
A 2114
B 1323
Code 88738
Your problem is clamping it in, or what?
Hi rob no my problem is that the tracer is too high once it start reading or decoding it does not touch the blade
NO ADVERTISING PLEASE
Custom key tool.
It allows you to created a key file.
Using measurements from instacode.
It is in the update software.
Creating a file, is not that hard.
Then load it in the machine by USB.
Nassreddine84 (20th April, 2017), PierreTheron (9th July, 2017), rob h (20th April, 2017)
Sx9 not cut properly the side cuts (1, 2, 3)
The 2, 4, 6, 8 cuts is ok
Toyota / Lexus 80k Series Shim for CONDOR XC MINI (XHorse)
- Item #7802
- Model: XHS-SHIM
- Manufacturer: XHorse
$10.00
http://americankeysupply.com/index.p...oducts_id=7802
rob h (20th April, 2017)
A Toyota shim for mini condor only, not master.
Why wouldnt it work on the master?shim Toyota 80.jpg
Last edited by rob h; 20th April, 2017 at 09:22 PM.
because they dont sell the master so they wouldnt have it as an application
Kw15 protocol is not for newer kw15bp
It's for old short kw15
Do not use for newer kw15bp
Spacing is off and it cuts off the tip of the key
rob h (28th April, 2017)
i made a custom key file for kw15bp
what do i need to do to upload it here?
where is the file on my computer?
i also made one for the chevy hu100 10 cut
Jobeso66 (16th October, 2017)
Create the new file.
Press export, and give this key file(*UK) a name.
Save it.
Press Import the file, Lets you load it in the PC.
And then press sync to load it in to the condor. To upload here, create rar file, and attach.
someone know how to copy ori BGA blade to BE blade? i decode key like hu64 take biding and go to "cut by biding" and select hu64-3 but totali wrong cut,other side i try copy to copy hu64 but its same again totali wrong!
bga_to_be.JPG
Bookmarks