>>>>>>>>>>>>>>CONDOR KEYCUTTERS <<<<<<<<<<<<<

**jose9413** · 17th July, 2017, 06:28 AM

Originally Posted by sleepyrz

Who did you buy it from???

There was a group buy on facebook, the guys name is moe, other people got good machines i guess i just have shit luck.

**Nassreddine84** · 17th July, 2017, 08:24 PM

Originally Posted by jose9413

There was a group buy on facebook, the guys name is moe, other people got good machines i guess i just have shit luck.

Moe is an official dealer for vvdi in lebanon so u dont have to worry mate if there is any fault or failure he may fix it for u

**louis21** · 18th July, 2017, 03:04 AM

Originally Posted by jose9413

There was a group buy on facebook, the guys name is moe, other people got good machines i guess i just have shit luck.

Please check your private message,I am trying to help you solve the problem

**jose9413** · 18th July, 2017, 03:08 AM

Originally Posted by louis21

Please check your private message,I am trying to help you solve the problem

Just added you

**jose9413** · 26th July, 2017, 02:34 AM

Anybody from xhorse here? I had a bad mother board on my condor xc mini and i finally got it replaced, i need it in english though, my serial number is KM03611722

**louis21** · 26th July, 2017, 03:11 AM

Changed,please update it,then it will be English

**weza247** · 26th July, 2017, 01:13 PM

Does Condor Mini have this function
kia hy20 right hand blade

**gokart** · 26th July, 2017, 01:26 PM

Originally Posted by gokart

Did you cut FO21 with KM03 V4.0.1? After cutting the clamp tray and the spindle stopped at wrong position. I had to remove the cutter and tracer in order to remove the clamp. Using the previous SW version it was OK. Otherwise the cutting was fine.

Attachment 463575

FO21 problem again. Condor KM03 V4.0.1 stopped again in incorrect position after cutting. The spindle was lower and this time the clamp hit the right side. See the photo.

**hipolitogt** · 26th July, 2017, 02:28 PM

Problem Megane II smartcard key. As you see in photo, middle key is original. Can you explain how to right cut? Also it read right the key Code. Attach images. Please help.

Enviado desde mi SM-G955F mediante Tapatalk

**sleepyrz** · 26th July, 2017, 04:12 PM

does it open the door??

**sleepyrz** · 26th July, 2017, 04:21 PM

Originally Posted by weza247

Does Condor Mini have this function
kia hy20 right hand blade

hy18 or hy18r

type in cuts and see which one looks right i think they may be backwards in the machine

**gokart** · 26th July, 2017, 06:27 PM

Originally Posted by gokart

Did you cut FO21 with KM03 V4.0.1? After cutting the clamp tray and the spindle stopped at wrong position. I had to remove the cutter and tracer in order to remove the clamp. Using the previous SW version it was OK. Otherwise the cutting was fine.

Attachment 463575

After the FO21 cutting the clamp hit the right side and the spindle didn't return to the top position. Do something with it because the hit was very big. KM03 V4.0.1. See the photo.

**weza247** · 26th July, 2017, 06:43 PM

Originally Posted by sleepyrz

hy18 or hy18r

type in cuts and see which one looks right i think they may be backwards in the machine

Thanks will try that

**hipolitogt** · 26th July, 2017, 08:37 PM

No

Enviado desde mi SM-G955F mediante Tapatalk

**rob h** · 26th July, 2017, 11:15 PM

No: they will not enter the lock.
No: they will not turn in the lock
No: they are difficult to push all the way in the lock
No: they go in the lock fine, but do not turn

There is a good chance that the lock is now damaged, by inserting these new keys.
The first shim is now bend by the tip of your new key.

The tip of the new key, slides under the first shim.
Instead of sliding it in the correct position.
File the tip, like the original. More jagged.
And open the cilinder, if needed to repair the shims.

Xhorse should correct this keys cutting profile.

Originally Posted by hipolitogt

No

Enviado desde mi SM-G955F mediante Tapatalk