>>>>>>>>SMOK SUPPORT THREAD<<<<<<<

[lush29]

What about reading ImmoData from EDC17, PCR by OBD with SMOK ??

Never try pcr. But edc17 not possible thru obd.

Sent from my SM-G925F using Tapatalk

[lupu_sandu]

PCR must be unlocked before try to read CS.
EDC17 must be read via CAN connection.

[lush29]

Via can conection works 100% i try it edc17

Sent from my SM-G925F using Tapatalk

[chrisi1909]

New All-In-One Update - Version 3.1.2.8 - no changelog to 3.1.2.5

[amigokola]

I understand that I have to wire directly X-CAN to EDC17 30,31,15,Can-H, Can-L and read it ??

PCR must be unlocked before try to read CS.
EDC17 must be read via CAN connection.

[Faraday]

I understand that I have to wire directly X-CAN to EDC17 30,31,15,Can-H, Can-L and read it ??

yes, have to connect direct do ecu

[amigokola]

Ok read's good but someone wrote here that it doesn't change data good ??

[amigokola]

You tried to adapt by direct CAN connection ?? I mean read old (immo data) and write to new on bench.

Today i try/ test edc17cp14 with smok. Read all immo data from ori and doner on the bench then try to adapt thru obd the way how is manual says, but this is the 3 rd edc17 which fails to do it.

Sent from my SM-G925F using Tapatalk

[lush29]

You tried to adapt by direct CAN connection ?? I mean read old (immo data) and write to new on bench.

I read both ecus by can then try to adapt doner thru obd as per manual says. But always give me error wrong pin. I try few many many times. Contact mirek but no answer

Sent from my SM-G925F using Tapatalk

[amigokola]

But adaptation thru can connection works ??

[Faraday]

I read both ecus by can then try to adapt doner thru obd as per manual says. But always give me error wrong pin. I try few many many times. Contact mirek but no answer

Sent from my SM-G925F using Tapatalk

I did med17 and edc17 no problem read immo data ok change immo data ok.

[lush29]

Unless if i do something wrong which i don't think because my friend try few times also. Any way next time i will post pictures if does not work.

Sent from my SM-G925F using Tapatalk

[iamfooser]

Something is very wrong with smok Mercedes cgw blocker for 204 and 212. I did one 212 and cgw is in bootloader so I thought it happened because I did not boost battery.

Then came another 204, I make sure I boost with stabilizer and then it freaking happen also. So now I have 2 cars to fix. Sigh.

Sent from my EVA-L19 using Tapatalk

[Repinator]

I want to say that I did 204 and 212 successfully (three pieces)

[iamfooser]

I didn't have any problem until recently. I did quite a lot before this.

Sent from my EVA-L19 using Tapatalk