>>>>>>>>SMOK SUPPORT THREAD<<<<<<<

[ciptel07]

km audi a6 a8 tuareg .....2011--2015 tested ok by eeprom prepare
dacia dash/ abs ok by OBD
dacia duster ecu SID 306 read km but NO write.......done by CLIP reprog
dacia airbag spc ....done by OBD
iveco bcm km by dump ...ok

[teerak2uk]

km audi a6 a8 tuareg .....2011--2015 tested ok by eeprom prepare
dacia dash/ abs ok by OBD
dacia duster ecu SID 306 read km but NO write.......done by CLIP reprog
dacia airbag spc ....done by OBD
iveco bcm km by dump ...ok

What year/model dacia?
What version clip/reprog?

[centrohifi]

Hi experience with this vehicle, protocol MS0005 work?
W117 Mercedes CLA
W176 Class A
W246 Class B
W166 Class M
W463 Class G


test solution? work??
ThK

[gogo660tc]

W117 Mercedes CLA : tested and works
tested and workstested and workstested and works

[centrohifi]

W117 Mercedes CLA : tested and works
tested and workstested and workstested and works

Work ?!
I installed filter emulators, as instructed, in dashboards and EZS, car star, all ok.
Start work on OBD to vary values, read data km , but do not modify

" Unlocked memory error !! "

what is the problem ??

[honingkoning]

Work ?!
I installed filter emulators, as instructed, in dashboards and EZS, car star, all ok.
Start work on OBD to vary values, read data km , but do not modify

" Unlocked memory error !! "

what is the problem ??

Not supported dash, open dash and do it by eep.

Wbr Adam.

[ciptel07]

dacia ph2 after 2013 and CLIP V156 and reprog ......and after reprog in engine ecu will be 0 km

[gogo660tc]

Work ?!
I installed filter emulators, as instructed, in dashboards and EZS, car star, all ok.
Start work on OBD to vary values, read data km , but do not modify

" Unlocked memory error !! "

what is the problem ??

first, try programed by obd,

3 of 4 cars , it works

my experience

first try to change the value for a moment, then install can filter. and reprogram the value
works on 3 out of 4 cars

my experience









.first try to change the value for a moment, then install can filter. and reprogram the value

[offsystem]

Opel Corsa C with DELCO 1,7 D ecu, i read eeprom and copy to donor ecu but IMMO is ON.
there are differences in the EE

Is cloning not possible ?

[ziko]

Opel Corsa C with DELCO 1,7 D ecu, i read eeprom and copy to donor ecu but IMMO is ON.
there are differences in the EE

Is cloning not possible ?

Try to reset cluster and body

[honingkoning]

Try to reset cluster and body

Reset cluster,reset body, erase keys.
Adapt all again and it should be good,

Wbr Adam.

[ZeddNZ]

Hi, Apologies if this is not right place to post.

New UHDS user. I have Peugeot 307 2006 with Johnson Controls no crypto. Plug in UHDS, told to program BSI only (no dash) by sales, new mileage appears on display, but after 10 mins old mileage reappears.

Sales say my BSI has been tampered with, but very unlikely. Say I must use eeprom tools to modify dash and UHDS for BSI, but if my car has NEC processor forget it...

Could someone please advise the correct procedure for P307 2005->?

Should I use the C4 Dash tool in UHDS?
I have dumps of the EE and Flash if useful prior to being modified if anyone is able to assist as to why UHDS doesnt work?

I did try Set block synchro as well but also did not work...

Thanks

Zedd

(ps - ignore communication error in the log file - i forgot to turn on ignition once )

[kizagt]

Hi, Apologies if this is not right place to post.

New UHDS user. I have Peugeot 307 2006 with Johnson Controls no crypto. Plug in UHDS, told to program BSI only (no dash) by sales, new mileage appears on display, but after 10 mins old mileage reappears.

Sales say my BSI has been tampered with, but very unlikely. Say I must use eeprom tools to modify dash and UHDS for BSI, but if my car has NEC processor forget it...

Could someone please advise the correct procedure for P307 2005->?

Should I use the C4 Dash tool in UHDS?
I have dumps of the EE and Flash if useful prior to being modified if anyone is able to assist as to why UHDS doesnt work?

I did try Set block synchro as well but also did not work...

Thanks

Zedd

(ps - ignore communication error in the log file - i forgot to turn on ignition once )

if you have JC bsi then in cluster have eeprom 25020 or 25040
make picture of cluster

[Iffy2008]

Normally bsi obd cluster manually



Sent from my iPhone using Tapatalk

[ZeddNZ]

Normally bsi obd cluster manually



Sent from my iPhone using Tapatalk

Thanks Iffy2008, but I bought SMOK UHDS for P307 205- because it was supposedly able to change dash and BSI all from OBD. I try to understand why it does not work. Developer says problem with BSI?

Thanks

ZeddNZ