>>>>>>>>SMOK SUPPORT THREAD<<<<<<<

[jodge]

I don't know about punto but alfa 147 all key lost read eep(dgxxx) no problem. No limitation on saved dumps. I have UHDS few years now and never had problem with hardware. I have never heard about faulty usb socket but I know it requaire good quality USB cable.

so don't need the pin code before the operation? Sounds good

thanks!

[Faraday]

so don't need the pin code before the operation? Sounds good

thanks!

You can add key to dump but you need other tool that work on dump like EFFI.

Smok body can only read/write dump and calculate pin code ( in some case calculate wrong).

[jodge]

You can add key to dump but you need other tool that work on dump like EFFI.

Smok body can only read/write dump and calculate pin code ( in some case calculate wrong).

Maybe you misunderstand I know the TP part it's not a big deal. But the trucode must need the pin -=before=- read the eeprom (maybe to entering the service mode..or something similar) only with the marelli type 1 BSI(punto mark II..etc) thats why i'm curious.

[dave11674]

has anyone used smok for denso ecu ?
2.5 / 3.2 ?

if so how did you do it and what was procedure ?
what about hours too ?

dave

[JandJSpeedShop]

Newest software download is corrupt for the UHDS and will not update. Anyone run into this??

[teerak2uk]

Had it sometimes not update with bad usb cable

[amigokola]

I have the same message.

Newest software download is corrupt for the UHDS and will not update. Anyone run into this??

[rob h]

I just did, all went fine.
Bosch NEC 70F3558+24C32 OBD new added

[JandJSpeedShop]

I have the same message.

Same here unless there is a better place to download the software???

[dave11674]

Goto website
click downloads on x bar
then goto
ALLINONE> update
and grab exe from there

WARNING
always use a high quality usb cable when using uhds
also when flashing it
remember just cos you bought a cable from maplis @ £29.99
does not mean its a high quality one
they buy cheap crap and repackage it

best ive found are the china blue see thru cables

[dave11674]

On a side not
the new body software will be relabeled too as it does not say which vehicles its for
new astra/insignia

dave

[ziko]

I get last year full smok, now every update must pay like someone get that module only, for example fiat marelly ecu, I need 2 module from smok
EU0022 (IAW 59F,IAW5AF,IAW4AF) = 320 eur
EU0025 (Magneti 8GSF ,Magneti 8GSW ,Magneti 8GMW) = 320 eur
Total for those 640 eur, io terminal those plus other ecus I already paid in full uhds (iaf 6f3,iaF 8F3) COST cheaper then update for smok full user.
Also today I needed ducato bsi with 93c86, smok update for this 440eur (((
Full fiat bsi ioterminal cheaper themn only this update for ducato

I cant understand smok seller, beter for me to have one in all tool but because of price will have to get ioterminal too

regards

[javyb]

I get last year full smok, now every update must pay like someone get that module only, for example fiat marelly ecu, I need 2 module from smok
EU0022 (IAW 59F,IAW5AF,IAW4AF) = 320 eur
EU0025 (Magneti 8GSF ,Magneti 8GSW ,Magneti 8GMW) = 320 eur
Total for those 640 eur, io terminal those plus other ecus I already paid in full uhds (iaf 6f3,iaF 8F3) COST cheaper then update for smok full user.
I cant understand smok seller, beter for me to have one in all tool but because of price will have to get ioterminal too

regards

U can buy yearly subscription for 1500 euros

Sent from my SM-G950F using Tapatalk

[ziko]

I know, but generally prices are too high

[mikhailzgv]

I bought the license. It is stated what does Passat B8. Really doesn't do. It that deception?