IMMO HONDA 1997 (0D28J)(MC68HC705B16 )

[CaioW]

Hi guys,

I have readed this immobilizer with Orange5 and transponder with VVDI2, but car dont start, green light keep blinking.
Someone can verify if my file is correct? I mean, well readed?

If the file are corrupted, we can virginize the imobilizer file?

Thanks DK!!!

[Meat-Head]

Cool, might be wrong chip in key id13 id33 id48 etc
other option get key from dealer

daewoo matiz can find id48 nil poi use genuine instantly done!

[CaioW]

Cool, might be wrong chip in key id13 id33 id48 etc
other option get key from dealer

daewoo matiz can find id48 nil poi use genuine instantly done!

I have used one PFC7935 and generate with VVDI2.
Do you think this car could bring one TP05/T5 transpnder? Or even one glass ID13 ?

Damn, does glass ID13 are hard to find.

[Meat-Head]

As a t5 is reuseable try it

[Klimek]

interesting topic has not yet explained is not closing, please
eeprom oki ,7931,t5,synchro?

[CaioW]

interesting topic has not yet explained is not closing, please
eeprom oki ,7931,t5,synchro?

Have not proved. Will try today and post here the result.

[qwertyuiop12]

Chip on this car ID33,You need Chip T5 for write and car start.

[CaioW]

I think the T5 transponder is for the cars who have 8 pins connections for Honda 1995~1997.. in 97 they start to bring memories with 52 pins, like this one 0D28J.

Like this:

CuzTDyB.jpg

[CaioW]

Update:

I'm here trying to start this blessed car.

I've done some proves, and now with and OLD file from one accord with the same year, same immobox and same motorola proc mask, the imobilizer grean light goes off but car dont start..

Will try again with the same file i posted here, maybe the soldering was bad..

Update again in a moment..

[CaioW]

Update 2:

With the original file the light keep blinking and engine dont try to start.

With the file from one accord the same year light goes ON and OFF, engine try to start but dont start.

Now I dont know if the problem is because the file is diferent from the original or the car have other issues.

edit: and all the tests i do with one PCF7935 with T5 i cant write the data.

[CaioW]

Sorry for the UP..

But anyone know if works if i put the immo info from other car? This sould work?

[Meat-Head]

Ok save the eeprom data out the engine ecu
small board oki chip read as 93c46 fill with ff
then use your working dump

try starting, cycke ignition on/off few times