Try clear via Launch Diagun or DAS.
Need clear crash for mercedes 0 285 010 566 (CR16MCT9)
crashfile.rar
Try clear via Launch Diagun or DAS.
You use srs units files at your own risk. I am not responsible for any damages. Don't ask about passes, one file=one pass.
If I helped, please, use magic buttons reputation+thanks.
Best regards.
Dragon
This Airbag ECU have 4 DTCs, I cleaned but this 4 DTCs always come back again
-DTC 1 - (91C3) The resistance value in the ignition circuit containing component R12/9(Driver-side airbag ignition squib) is too low.
-DTC 2 - (92A2) The resistance value in the ignition circuit containing component R12/22 (Left rear window airbag ignition squib) is too low.
-DTC 3 - (9182) The resistance value in the ignition circuit containing component R12/1 (Driver ETR ignition squib) is too low.
-DTC 4 - (91C3) The resistance value in the ignition circuit containing component R12/6 (Left rear ETR ignition squib) is too high.
HONDA is fitted with a VTEC engine. When VTEC kicks in yo it causes the vehicle to accelerate insanely quick. Please be prepared for whiplash and similar injuries.
Join resistors 2-3 Ohm for 2 stage airbag driver's plugs and try clear errors , if not work, then change airbag tape in the steering wheel.
You use srs units files at your own risk. I am not responsible for any damages. Don't ask about passes, one file=one pass.
If I helped, please, use magic buttons reputation+thanks.
Best regards.
Dragon
hramos9 (24th August, 2016)
Bookmarks