MPPS v18 GOOD OR NOT?

**sonique** · 20th January, 2017, 11:38 PM

Hello

any one fixed start mpps v18
but only this :
application exception error?

thanks

**Yura123** · 21st January, 2017, 10:55 AM

Originally Posted by twchnodictator

Well mates, I started this topic and got the mpps so now I can share my results, finally.
Seems to be everything ok. Tried on edc15,16,17 and denso opel. Everything works very good and without any problems. Only once program said good bye and turned off during reading edc16 VW via obd, but I think it was WinXP problem. After installing win7 x32 everything works like a charm. Also according to your posts I think it's worth to buy it.

how you launched it in XP?
What driver for XP used?

**OVERSPEED** · 25th January, 2017, 03:09 PM

MED17.4.2 DS3: had a CKS problem :
first made by OLS - didn?t start
second made by MPPS - not worked too, then import in OLS and correct again, check with MPPS and no errors... and this time it worked.

**OVERSPEED** · 25th January, 2017, 09:48 PM

ME7.5 A3 180 With 29F400 not work... either auto, either selectin 29F400... but old MPPS V12/13 didn?t work either... just an old V3 I had worked

**Yura123** · 26th January, 2017, 02:18 PM

Originally Posted by twchnodictator

Well mates, I started this topic and got the mpps so now I can share my results, finally.
Seems to be everything ok. Tried on edc15,16,17 and denso opel. Everything works very good and without any problems. Only once program said good bye and turned off during reading edc16 VW via obd, but I think it was WinXP problem. After installing win7 x32 everything works like a charm. Also according to your posts I think it's worth to buy it.

Originally Posted by Yura123

how you launched it in XP?
What driver for XP used?

When running on XP, appears a message

MPPS no longer supports Windows XP or lower

**filutek** · 27th January, 2017, 01:05 PM

Kangoo EDC17C42 bootmode TriCore R/W = OK
MPPS not CRC bootmode TriCore.

**jameswalker** · 27th January, 2017, 08:29 PM

Anyone tried an ST10 processor? ME7.1.1G?

**filutek** · 27th January, 2017, 08:42 PM

MPPS boot ST10 tab generic it works.

**pulsar2000** · 27th January, 2017, 08:54 PM

Originally Posted by Yura123

When running on XP, appears a message

MPPS no longer supports Windows XP or lower

Dont get that, win XP dont work full stop on mine . windows 7 minimum, how did you see message ? on xp ?

**jameswalker** · 27th January, 2017, 08:58 PM

Originally Posted by filutek

MPPS boot ST10 tab generic it works.

boot mode only?

and will it do both the flash plus processor internal memory?

thanks!

**nbtechnic** · 28th January, 2017, 10:12 AM

Alfa Romeo EDC16C39-5.5 CAN, ok perfect
Reading in less than 2 minutes
My mpps is deliver and immediately test!
It will complete my Fgtech who did not read some car!

**gomarota** · 29th January, 2017, 10:34 PM

anyone can tell me what the advantatges between mpps v18 and kess/ktag chinese? at the moment i only see the psg16, there is any other thing?

regards

**Faraday** · 30th January, 2017, 11:22 AM

Originally Posted by gomarota

anyone can tell me what the advantatges between mpps v18 and kess/ktag chinese? at the moment i only see the psg16, there is any other thing?

regards

no token, some ecu EDC16 OPEL in example full write by obd