Any "OFF" file (DPF, EGR, SCR, FLAPS, DTC) for FREE!

[Yhoni]

here is the original one

Hello friend, here is your file egr-off and maf-off.

Click "THANKS" AND "REPUTATION" button and then i will send your password.

Greetings.

[voodevil]

hi, need help with fiat scudo sid803a hw9661642180 sw9664626680 need dpf off and cs. thanks in advance

[Yhoni]

hi, need help with fiat scudo sid803a hw9661642180 sw9664626680 need dpf off and cs. thanks in advance

Hello friend, here is your file.

Click "THANKS" AND "REPUTATION" button and then i will send your password.


Greetings.

PS: I don't have the checksum verification tool, sorry.

[voodevil]

Hello friend, here is your file.

Click "THANKS" AND "REPUTATION" button and then i will send your password.


Greetings.

PS: I don't have the checksum verification tool, sorry.

Thanks, and i need to disable dpf in bsi ? Reset dpf counter in ecu?

[Yhoni]

Thanks, and i need to disable dpf in bsi ? Reset dpf counter in ecu?

You should Reset dpf counter in ecu before to write DPF OFF file.

[tihiuvek]

Hello,

Can you help me with EDC16c3 mazda?
Ecu 0281012531
Thanks!

[kosta89]

sonata 2014 hybrid 2.4
Continental 2g911 sim2k 143
YCY4RC1A
VIN KMHEC4A42CA031248
NEED DTS OFF P0420
tnx for help

[kive]

Hello friend, here is your file egr-off and maf-off.

Click "THANKS" AND "REPUTATION" button and then i will send your password.

Greetings.

Hi, the maf delete worked, thanks for that.
But now the idling is very bad and sometimes the engine dies. I Tried to increase the idling RPM a bit, still the Same problem. Is there maybe a Issue in your file or a smart workaround?

Switched back to the original File and no issues.
Measuring Block 1 says 5,xx mg of fuel while idling (original, stable)
With your Custom file it changes Between 0,4mg ang 6,xxmg of fuel (unstable)

I hope you can help me.

[Yhoni]

Hi, the maf delete worked, thanks for that.
But now the idling is very bad and sometimes the engine dies. I Tried to increase the idling RPM a bit, still the Same problem. Is there maybe a Issue in your file or a smart workaround?

Switched back to the original File and no issues.
Measuring Block 1 says 5,xx mg of fuel while idling (original, stable)
With your Custom file it changes Between 0,4mg ang 6,xxmg of fuel (unstable)

I hope you can help me.

I would try to disconnect the lambda probe to test if the idle is maintained.

[dEONBE]

Good afternoon, can anybody please help with EGR off on a Ford Transit with SID802?
Thank you

[kive]

The Car doesnt have a Lambda Probe (golf mk4 asz)

[Yhoni]

The Car doesnt have a Lambda Probe (golf mk4 asz)

Ok, so you should write the original file, disconnect the maf and check if the idle is stable or if the engine stops as well.

[Yhoni]

Good afternoon, can anybody please help with EGR off on a Ford Transit with SID802?
Thank you

Hello friend, here is your file.

Click "THANKS" AND "REPUTATION" button and then i will send your password.

Greetings.

[kive]

Ok, so you should write the original file, disconnect the maf and check if the idle is stable or if the engine stops as well.

I tried that already. With disconnected maf the idle is ok, just no power

I also tried your file with maf pluged/unplugged.

[Yhoni]

I tried that already. With disconnected maf the idle is ok, just no power

I also tried your file with maf pluged/unplugged.

Ok friend, I will review it tomorrow and inform you.

Greetings.