B1684 ACU CONFIGURATION IS DIFFERENT - STOLE SANTA FE

[PatricioC]

Hi everybody


I hope than you can help me, some time ago my Hyundai Santa fe 2011 was stolen, after some days I did recover it, but the main problem was without some parts, including body parts, electronic parts, etc.


After almost 2 years my SUV is complete, I bought ECU, Front crash sensors, steering driver airbag, front body and others. Right now my car is working, but the airbag light on the dashboard is still ON. I have a LAUNCH scanner and I read the airbag module and this have a permanent fault (B1684 - ACU Configuration is different). The SRSCM or ACU (Airbag control unit) was not changed, it's the original, so I can't understant the main reason of my problem.

The number part of my SRSCM is 95910-2B080, I did check that with the local dealer, and the part number is the correct for my VIN number.


Some local technicial said me than I need change the SRSCM, but the price here in my country it's over 1300USD.


Could you help me in order to solve this problem?


Thanks in advance,


Patricio

[credoline]

First you must tell us, from what country and city you are. And after we must find the guy from DK forum closest to you.

[PatricioC]

Santiago, Chile, South America. BR

[FxShaw]

if the part # is the same and you are sure its the right module for the car, then it will need to be program to vehicle.

[PatricioC]

if the part # is the same and you are sure its the right module for the car, then it will need to be program to vehicle.

I did read in someplace than the ACU only can be programmed one time. it's true that?, You mean perform a variant coding??


BR,


Patricio

[FxShaw]

I did read in someplace than the ACU only can be programmed one time. it's true that?, You mean perform a variant coding??


BR,



Patricio

Dunno about that being able to program one time but yea variant coding.

[PatricioC]

Dunno about that being able to program one time but yea variant coding.

OK, I will do some questions to the local dealer and I'll inform you. Thanks a lot for your help.

[credoline]

Disconnect crash sensors and erase DTC-s and check what DTC-s will remain. Maybe DTC B1684 will disappear.

[PatricioC]

Disconnect crash sensors and erase DTC-s and check what DTC-s will remain. Maybe DTC B1684 will disappear.

I did that, but the code B1684 don't disappear and appear front drive and passenger crash sensor disconnect. I think the problem it's other.

[credoline]

Yes, you can program only one time. BUT !!! If you read eeprom from airbag module before programming, you can after programing write back original virgin file and program again. And so many times.

[PatricioC]

Yes, you can program only one time. BUT !!! If you read eeprom from airbag module before programming, you can after programing write back original virgin file and program again. And so many times.

Thanks, I need to use a special interface to read that EEPROM type, do you know what kind of epprom this have?

[credoline]

Its very much possible that you are connect some element what your car have not before you start to repair. Understand ? Try to disconnect something and check what happen. Or maybe some sensor is not appropriate for your car, different number. In VAG vehicle that i have before. If crash sensor is not just right for my car - problems. Better check are you buy good compenents for your car, specially crash sensors !!!

Hi everybody


I hope than you can help me, some time ago my Hyundai Santa fe 2011 was stolen, after some days I did recover it, but the main problem was without some parts, including body parts, electronic parts, etc.


After almost 2 years my SUV is complete, I bought ECU, Front crash sensors, steering driver airbag, front body and others. Right now my car is working, but the airbag light on the dashboard is still ON. I have a LAUNCH scanner and I read the airbag module and this have a permanent fault (B1684 - ACU Configuration is different). The SRSCM or ACU (Airbag control unit) was not changed, it's the original, so I can't understant the main reason of my problem.

The number part of my SRSCM is 95910-2B080, I did check that with the local dealer, and the part number is the correct for my VIN number.


Some local technicial said me than I need change the SRSCM, but the price here in my country it's over 1300USD.


Could you help me in order to solve this problem?


Thanks in advance,


Patricio

[PatricioC]

Its very much possible that you are connect some element what your car have not before you start to repair. Understand ? Try to disconnect something and check what happen. Or maybe some sensor is not appropriate for your car, different number. In VAG vehicle that i have before. If crash sensor is not just right for my car - problems. Better check are you buy good compenents for your car, specially crash sensors !!!

Hi, last weeked I disconnected front crash sensors and the fault was the same, I will try to disconnect the others parts and I'll inform you. Thanks!!!

[FxShaw]

I think he got a used module so dunno about that writing back virgin file back to module part.. I think you will need a code to program it.

[credoline]

Patricio words:
The SRSCM or ACU (Airbag control unit) was not changed, it's the original