VVDI KEY TOOL

[scorpion175]

can vvdi key tool clone megane 3 card??

[Maartinj]

can vvdi key tool clone megane 3 card??

simple detect card and check if is clone able or not

[autoTkey]

It's a 2013 honda accord org spare key
I want to duplicate its immobilizer chip and put it in a new key
I have a vvdi key tool but it seems it can not clone ID47
I have ID46 raw chips is it possible to change it to ID 47?
is it possible to make a new key with a ID46 chip? if not what should I do?

You already got your answer, mate. No miracles to be expected here.
You need to program a new original Honda ID47 key or use a blank PCF7938xa and precode it to the correct type (G or A, I'm not familiar exactly) and them program with a tool that supports your car.

[ghsouri]

You already got your answer, mate. No miracles to be expected here.
You need to program a new original Honda ID47 key or use a blank PCF7938xa and precode it to the correct type (G or A, I'm not familiar exactly) and them program with a tool that supports your car.

thanks for reply

in vvdi key tool it says '' generate 7938x model with Xhorse sn02 can be used for special ID47 ''
my question is should it be unlocked ? if it was locked as mine so I can not do it with sn02 ?Am I right?

would you please see this link ?
http://blog.vvdishop.com/use-vvdi-ke...i-remote-id47/
as shown it's an unlocked 7938 but mine is locked

I have only vvdi key tool so I'm in trouble for doing that

[autoTkey]

Your original key should be locked, otherwise it won't work on the car.
You don't need the original key to generate SN02 - you must use a blank SN02 Xhorse remote for that procedure.
And after that, again you need to program the generated SN02 to the car using a tool that supports it.

[ghsouri]

Your original key should be locked, otherwise it won't work on the car.
You don't need the original key to generate SN02 - you must use a blank SN02 Xhorse remote for that procedure.
And after that, again you need to program the generated SN02 to the car using a tool that supports it.

I really appreciate for your reply
can it be done by x100?

[autoTkey]

Don't know, never did a job on this car.
Try in the X100 thread.

[PierreTheron]

Ok finally this tool helped
coded remote to 2017 ecosport ford
then used vvdi keytool to clone the transponder
All working 100 % for three weeks now .

Copied JMC remote with keytool and also working 100%

This at least paid back 1% off the tool cost ...

[doublexx]

Hi friends I have a problem with Bluetooth connection, When i update my Phone with Android 8.0. Before that i was with Android 7.1.1 and all was OK. Android 8.0 not support Bluetooth.......... !?!?!?!?!?!?!??!

[autoTkey]

With me it's working on Oreo 8.0. Problem is in you device.

[doublexx]

Hmmmmmmm,, strange,,,, Problem with my phone, or VVDI Keytool, In other Phone with old Android Works fine,,,!?

[dorofteius]

I have Galaxy Note 8 , Android 8.0, and it is working ok.

[Maartinj]

agree, tested on P10 plus Android 7 and 8 and all good

[Maartinj]

Contact Xhorse Technical Support
or
link : http://www.xhorse.uk/issue/

From now you can contact Xhorse technical support and complain what is not work / issue with device you have.

Simple write all necessarily information and update pictures / log , and one of Xhorse tech support will contact you.

Please DONT USE THIS LINK to ask tech support "how to do.... or where to click to do ...." activations, prices etc

Please write your issue short and sweet.

[sdnatlst]

looking at buying this, but a bit confused

can i use any it to clone id46 chip from original remote, to a china clone remote with id46 chip inside?

for example also, if i have a CORSA D, can i copy the transponder and also REMOTE central locking without plugging into any OBD device at all?