nagib (17th December, 2017)
it is logic to want to sell their chips,from somewhere they must make money and i do not think that they are overpriced at about 5 euro,silca wants 12 euro...
the think for now is to see what it can really do,about 2 weeks ago i had tried the online calculation 4d and it worked,i do not remember what id was,since then nothing else come to test better for 4d and i am waiting to see id48 how it is going to work and at what price
nagib (17th December, 2017)
good evening
I have a question.
Can I use transponder vvdi 4c-4d as tpx2 in zedbull clone?
Reading it in zedbull shows how txx2, but can I use it anyway?
Thank you
Upa-S ,Vvdi key tool, Zedfull, Xpad, KM100, Obdmap, Scanmatik pro2, Ioterminal, Pcmflash, Mdflasher, Fvdi, Ck100, Fvdi, Roudrill
I wouldn't count on it, but why don't you try and tell us? Nothing to lose there.
Does anyone with region ME has newer version than 2.0.6? I can't update any higher. :/
On xhorse blog was a note about region chage possibility. Now support changes their mind and region change is impossible. Do You have any experience, which region is the best for updates frequency?
This key tool can read the hitag-aes transponder, pcf7953.
But is not able to tell me if it is locked or unlocked.
I like to believe that after writing succes, the key is fine.
Some comformation, from the key tool that it is unlocked should be in the tp menu!
yes rob,all is ok,see pic
Pcf7953 hitag2 no hitag aes
Envoyé de mon iPhone en utilisant Tapatalk
hitag3.JPG
.................................................. .................
http://www.diagwiki.com/hitag
Last edited by coolsoda; 21st December, 2017 at 03:50 PM.
Locksmith Hungary (21st December, 2017), RIMKACHIP (21st December, 2017), WRX 14 (22nd December, 2017)
good evening
I was able to use the transponder vvdi 4d-4c transforming into an id62 suzuki with fvdi, then used with zedbull clone china.
I work perfectly as tpx2
Upa-S ,Vvdi key tool, Zedfull, Xpad, KM100, Obdmap, Scanmatik pro2, Ioterminal, Pcmflash, Mdflasher, Fvdi, Ck100, Fvdi, Roudrill
Today I learn that xhorse chips id 46 are reusable. What about xhorse 4c/4d and id 48, aree they reusable too?
Yes, in theory you can unlock Xhorse special 4d/4c chip, but i haven't tested yet. Shown on bottom of user manual page 7.
Just like the user manual say it supports all 48 online cloning which isn't up and running yet.
Have you tested and confirm you can reuse 46 or just read about it?
Last edited by WRX 14; 23rd December, 2017 at 01:01 AM.
nagib (23rd December, 2017)
Not tested by myself. But friend with experience confirmed that. I trust him.
Last edited by nagib; 23rd December, 2017 at 12:02 PM. Reason: writing error
WRX 14 (23rd December, 2017)
IMG_20171223_103959.jpgUpdated version, still not able to tell if it is locked/unlocked.
I dont have any other keys, then these. I ordered them from Chinese sellers.
That might be the problem.
I will go shopping for a original key.
Brat (23rd December, 2017)
You can reuse 100% and also you can reuse LKP02.
For lkp02 before need read chip and press edit. On Edit screen unlock the chip and you can reuse again.
nagib (23rd December, 2017)
It’s normal vvdi key tool or handy baby can not read data hitag aes can just read ID. If you want to read if you are lock or unlock. Test on car. For example : on clio4 with clip you can show if you card is virgin or not. With Nissan consult i don’t know if you can.
Envoyé de mon iPhone en utilisant Tapatalk
Bookmarks