VVDI KEY TOOL

[buga37]

tried to renew nissan key with pc board A2C32801600 FCC:KR5S180144014 key can not be programmed after renewing it, vvdi2 can't detect it ither
Samic, please fix it. I have a lot of key to renew

[voltec]

Hi can you send me picture of your language selection please I have only English in ME and EU version. Thanks


Envoyé de mon iPhone en utilisant Tapatalk

I have NA version still.
IMG_20171030_072948.jpg

[RIMKACHIP]

Thanks my friend with this picture we can show that dealer change only word EU ME on screen not version of vvdi because language not change !!!


Envoyé de mon iPhone en utilisant Tapatalk

[Samic]

tried to renew nissan key with pc board A2C32801600 FCC:KR5S180144014 key can not be programmed after renewing it, vvdi2 can't detect it ither
Samic, please fix it. I have a lot of key to renew

please check your VVDI KEY TOOL is the latest version and device displayed renew success,
if so please check the frequency and also try to read the chip by other devices.(first ensure the used key still working)

[Samic]

yes dont try it, you will kill the key

M3N key should be always 'unlock' status, so no need to unlock,directly re-programming.

[viejomatius]

M3N key should be always 'unlock' status, so no need to unlock,directly re-programming.

So if the key doesnt lock why did you put this key in the manual? Before renew with your tool it said unlock, now says lock y doesnt emit frequency, the key was killed...


Enviado desde mi Moto G (4) mediante Tapatalk

[Samic]

i have try to unlock land rover keyless my key frequency is 315MHZ
i have use the menu 5E0U40247 434mhz
after the procedure key frequency changed to 304.5mhz and key info (hitag unable to clone)

key frequency depends on the PCB hardware,parts of PCB you cannot select incorrect frequency to renew, otherwise it will not keep the original frequency or the new dump frequency.
we will try to find a blank key and check,not sure whether this key support re-programming directly.

[buga37]

please check your VVDI KEY TOOL is the latest version and device displayed renew success,
if so please check the frequency and also try to read the chip by other devices.(first ensure the used key still working)

It says write success, vvdi key tool detects the key(vvdi2 can’t )but it can’t be programed to the car, there is no way that I choose wrong selection for the keys pc board, all numbers are match with vvdi tools renew key menu


Sent from my iPhone using Tapatalk

[Samic]

So if the key doesnt lock why did you put this key in the manual? Before renew with your tool it said unlock, now says lock y doesnt emit frequency, the key was killed...
Enviado desde mi Moto G (4) mediante Tapatalk

sometimes the used key inside dump corrupted,if use VVDI KEY TOOL this option renew again will let key working again,impossible to kill the key.

[Samic]

It says write success, vvdi key tool detects the key(vvdi2 can’t )but it can’t be programed to the car, there is no way that I choose wrong selection for the keys pc board, all numbers are match with vvdi tools renew key menu
Sent from my iPhone using Tapatalk

pls check whether emit frequency after renew,will try to find out the caused reason.
this Nissan is 'AES'type, VVDI2 currently cannot support detect,only VVDI KEY TOOL support.

[buga37]

sometimes the used key inside dump corrupted,if use VVDI KEY TOOL this option renew again will let key working again,impossible to kill the key.

Tried flashing it many times 4 different keys with same pc bord id
Same result



Sent from my iPhone using Tapatalk

[godfathertre]

can somebody post a link for the id 46 transponders for the vvdi key tool just ordered one but only see 4c or 4d transponders thank you .

[crazylou2017]

can somebody post a link for the id 46 transponders for the vvdi key tool just ordered one but only see 4c or 4d transponders thank you .

Yesterday,a friend tested id 46 transponder and verified working fine, several minutes ago I asked him where he bought from, he said vvdishop.

[eagleone-two]

http://m.vvdishop.com/wholesale/id46...er-copier.html

https://xhorsepolska.pl/pl/p/Transpo...I-KEY-TOOL/273

[TERMINATOR1000]

hi
unable to clone id 33 !
B.R