Original key
VVDI KEY
KEYLINE KEY
Στάλθηκε από το F3311 μου χρησιμοποιώντας Tapatalk
Original key
VVDI KEY
KEYLINE KEY
Στάλθηκε από το F3311 μου χρησιμοποιώντας Tapatalk
Last edited by kleidaras; 11th January, 2018 at 04:15 PM.
nagib (17th January, 2018)
Hi to all,
I have programed a key for touareg ph1 with vvdi wirless key. The key work fine but sometimes, the remote doesn't work. I think a issue with the rolling code.
Someone already have the same issue?
Thanks
Lalaina
Envoyé de mon MI PAD 3 en utilisant Tapatalk
Debating on VVDI and KD900. I like that VVDI can clone transponder chips and possibly 48 stuff in the future, but mainly need it for preparing remotes for cars. Is VVDI remote coverage spotty compared to KD900? From what I've read over in here it would seem so. Thank you.
darknezz19 (18th January, 2018)
I have 21 new remotes. Some wirless some wired.
I can collect the points only frome one and it was 25 points.
Can somone explain this ?
What do they mean with wired and wireless remote keys? What is the difference?
Garfieldus (18th March, 2018)
auto techniek (19th January, 2018), Garfieldus (18th March, 2018)
Hello garknezz19, I have compared VVDI and KD900, and in the cars that I have made, kd900 is the best to generate remote controls.
I want my comment to be useful.
Regards.
darknezz19 (20th January, 2018)
Hello, I share my experience when unlocking a Chrysler key OHT692427AA
https://youtu.be/kQDfS6MR6G8
Regards.
doctore (21st January, 2018)
Hi ! may you already made all, then all is ok ! sometimes car stopping on the way suddenly, I've already faced such as problem I made a new key, same problem, then I made off the immo, still the same, finally the circuit sensor pmh the problem Grrrrrr
nagib (21st January, 2018)
Hi, good evening.
Im facing the following issue with Key Tool when trying to unlock some BMWs remotes.
I had 5 pieces of 5WK49145 868mhz, keyless remotes.
Originally of course they were all locked.
After using Key Tool to unlock then, now I have 3 units succesfully unlocked, but other 2 units after several tries, can not unlock them, always IC error. Now when I read those 2 remotes, seems they have been deleted at all.
Tango and Kay Tool does not even recognize any transponder on them.
Why happens this issue please ??
Is there anyway I can revive those two remotes ??
Thanks a lot.
Regards
All 5 are definitely same part number? Are other 2 maybe 5WK49125 with PCF7945? There is some difference you can visually notice, check the key tool manual with the renew wiring diagrams to see both types.
Yes if chip fully deleted won't detect in key tool or other (i've done this by accident in past messing around in VVDI-prog), and you can rewrite the chip with new virgin file using VVDI-prog and the PCF adapter. But of course need to ensure it is remote type 5WK49145 first, or won't work.
Thanks for reply WRX14.
For sure all 5 boards are the same.
One thing I notice at the beginning was that in all 5 boards in their PCF ICs, its written PCF7953.
All 5 boards comes from remotes cases where 5WK49145, which are supposed to be confort access remotes with 868mhz.
OK, when I read all them with Tango, Tango recognized all them as PCF7945.
Were they not supposed to be PCF7952 or PCF7953??? As they have written on their ICs??
And then, why Key Tool did renew some of them at first try, and failed on two and deleted them.
Thanks so much.
Regards
Bookmarks