VVDI KEY TOOL

**WRX 14** · 22nd January, 2018, 12:40 AM

Originally Posted by Eskerra

Thanks for reply WRX14.
For sure all 5 boards are the same.
One thing I notice at the beginning was that in all 5 boards in their PCF ICs, its written PCF7953.
All 5 boards comes from remotes cases where 5WK49145, which are supposed to be confort access remotes with 868mhz.
OK, when I read all them with Tango, Tango recognized all them as PCF7945.
Were they not supposed to be PCF7952 or PCF7953??? As they have written on their ICs??

And then, why Key Tool did renew some of them at first try, and failed on two and deleted them.

Thanks so much.
Regards

Ok, yeah i had a similar problem last week where both VVDI2 and key tool detect wrong Chip ID's but the opposite way from you (Have 7945, but shows as 7953) - seems they have got the id's back to front in the software. Showed correctly in CN900 mini. I attached some photos of same key in the key tool, VVDI2 and CN-900, you will see on chip it shows 7945 I thought i had posted on the forum when i found the problem, but seems i didn't (or maybe in the VVDI2 thread).

Can't comment on why tango shows other id though, but if you go by whats written on chip and write back the virgin file for 5WK49145, then it will detect transponder again in tango/key tool.

Did you check what tango shows with the other keys now that they have been renewed?

**ALBERTO_** · 22nd January, 2018, 06:55 AM

[QUOTE = Eskerra; 3194959] Gracias por responder WRX14.
Por supuesto, las 5 tablas son iguales.
Una cosa que noté al principio fue que en todas las 5 placas en sus circuitos integrados PCF, está escrito PCF7953.
Todos los 5 tableros vienen de los casos remotos donde 5WK49145, que se supone que son controles de acceso de confort con 868mhz.
OK, cuando los leí con Tango, Tango los reconoció como PCF7945.
¿No se suponía que fueran PCF7952 o PCF7953? Como han escrito en sus circuitos integrados?

Y luego, ¿por qué Key Tool renuevó algunos de ellos al primer intento, y falló en dos y los eliminó.

Muchas gracias.
Saludos [/ QUOTE]

In the remotes that I unlocked, some died after the attempt,

Some could return to life by desoldering the pcf7941 and with the help of Orange, however others did not resuscitate. I had to replace them. :lagrimas de alegria:

**diephieu2023** · 22nd January, 2018, 05:27 PM

Hello,

1. my vvdi is na version. I want to convert to eu version. Anybody help me with solution.

2. I plug my vvdi to Xhorse Update Kit 1.2.2 -> Xhorse Update Kit 1.2.2 find my vvdi key tool ok.
But I plug my vvdi to vvdi-key-tool-update-v2.3.9 --> vvdi-key-tool-update-v2.3.9 not find my vvdi

**WRX 14** · 22nd January, 2018, 05:42 PM

The VVDI key tool upgrade kit V2.3.9 that you refer to is an old version, they changed to combine all tools into one upgrade kit. Once your device firmware version over a certain release no longer detects i believe like you said.
For now upgrade kit V1.2.3 is the latest version (released today).

I'm not sure about how to change the region, did you try contacting the dealer you purchase it from? Maybe they can help or refer you to Xhorse Tech support

**Tariel** · 23rd January, 2018, 03:56 PM

Hello.

VVDI Key Tool ME version work with US market cars ( generate remote , ... ) ?

**newone** · 23rd January, 2018, 05:18 PM

Originally Posted by Tariel

Hello.

VVDI Key Tool ME version work with US market cars ( generate remote , ... ) ?

yes of course

**Tariel** · 24th January, 2018, 10:07 AM

VVDI Key tool ME version can unlock US version remote ( AUDI, BMW, HYUNDAI, NISSAN ) ?

**newone** · 24th January, 2018, 11:41 AM

Originally Posted by Tariel

VVDI Key tool ME version can unlock US version remote ( AUDI, BMW, HYUNDAI, NISSAN ) ?

if your remote type listed then yes

**Fernandowap** · 24th January, 2018, 09:53 PM

good evening

Continuing testing with vvdi key toll

Today I could test in 2 cars here in Brazil.

1 Fiat Palio Atractive 2012 Transponder PCF7946 Cloned successfully vvdi key
2 Toyota Etios 2017 Transponder 4D67 Successfully cloned with vvdi key

Thank you

**kluczbum** · 25th January, 2018, 09:10 PM

keytool me version
I tried copy audi a3 1998 (chip 48) dash UN4
40min and succes copy 48chip

**tarabostesul** · 26th January, 2018, 06:20 PM

My vvdi is ME version. I want to convert to Eu version. Anybody help me with solution. ..??

**nagib** · 27th January, 2018, 01:59 AM

Why taken so long? Tryed many times? I had only one succesfull clone id 48 (Golf from 2002) and was cloned in 10 sec. After that came some litle updates and it was not able to do cloning of id48. Tryed with Fiat, DAF truck and Alfa Romeo without success.

**nagib** · 27th January, 2018, 11:30 AM

I write that about Audi A3 1998.

**mcgustoo** · 27th January, 2018, 12:40 PM

i already renew that key with vvdi and match that key to the E90 BMW.... All works perfect!

**mcgustoo** · 27th January, 2018, 12:41 PM

i already renew that key with vvdi and match that key to the E90 BMW.... All works perfect!

Originally Posted by WRX 14

Ok, yeah i had a similar problem last week where both VVDI2 and key tool detect wrong Chip ID's but the opposite way from you (Have 7945, but shows as 7953) - seems they have got the id's back to front in the software. Showed correctly in CN900 mini. I attached some photos of same key in the key tool, VVDI2 and CN-900, you will see on chip it shows 7945 I thought i had posted on the forum when i found the problem, but seems i didn't (or maybe in the VVDI2 thread).

Can't comment on why tango shows other id though, but if you go by whats written on chip and write back the virgin file for 5WK49145, then it will detect transponder again in tango/key tool.

Did you check what tango shows with the other keys now that they have been renewed?