VVDI KEY TOOL

[autoTkey]

Xhorse didn't do this, yet. But Tjecu does it from time to time with their CN transponders. I didn't know JMD also has such practice with the chips for HandyBaby.

[newone]

Wonder if I buy another 100pcs and they change to NEW BETTER CHIP with another update. As handy baby done in past. Now they release RED BETTER CHIP. Same story.

they sell their tool cheap so is logical in updates to start throwh out some transponder types to keep the sales of their chips up,from somewhere they must make money

[sleepyrz]

Xhorse R1 XDKTR1 Renew Adapter 13-24 for VVDI Key Tool




looks like another 12 adapters for the vvdi key tool remote unlock

VVDI Key Tool remote renew XDKTR1EN adapters 13 -24 Support Honda (2 styles), Nissan (3 styles), Chrysler (3 styles), Peugeot, Buick (2 styles), Mazda.
So far, VVDI Key Tool already supports 24 kinds of original remote renew without welding.

[dorofteius]

Today, I made a Astra H remote renew. And it worke'd. With the files that I shared.
Why does keytool, does not implement that ? Maybe because it is selling another tool .
Otherwise, I do not understand why ?

[nagib]

they sell their tool cheap so is logical in updates to start throwh out some transponder types to keep the sales of their chips up,from somewhere they must make money

Thay can make money from sale existing chips. But... Today maked 4c for Proton. Used 4d xtool transponder. Copyed success but car dont start. Done with another tool, with TPX1. Disappointing.

Sent from my VTR-L09 using Tapatalk

[holbi1]

Any progress with Volvo id 48 copy because I try 3 difrent cars and nothing 8 times aqustition data ok bit cant read data from org key.

[newone]

Thay can make money from sale existing chips. But... Today maked 4c for Proton. Used 4d xtool transponder. Copyed success but car dont start. Done with another tool, with TPX1. Disappointing.

Sent from my VTR-L09 using Tapatalk

i do not think that the problem was the chip but the hardware,i bought it as a chip money saver and in most times worked ok,last time failled was a terios,3 times stacked at calculation,rw4 did it but the prices of the two machines can not be compared,rw4 earned its money all those years and done its job every single time,key tool now save a me a lot from silca chips but it is not the machine you can trust for everything

[nagib]

i do not think that the problem was the chip but the hardware,i bought it as a chip money saver and in most times worked ok,last time failled was a terios,3 times stacked at calculation,rw4 did it but the prices of the two machines can not be compared,rw4 earned its money all those years and done its job every single time,key tool now save a me a lot from silca chips but it is not the machine you can trust for everything

I dont know do I need to save this used chip, is it reusable or not? When I read them keytool show its 4C. But as I say car wont start.

Sent from my VTR-L09 using Tapatalk

[ghostrider72]

Does anyone have a problems with remote renew for BMW E series? Ive tried all 3 options in Key Tool and all i can get is error. All connected with adapter



Regards

[autoTkey]

My VVDI Key Tool refuses to bind with VVDI2 and ID48-96 not allowed on it.
Actually it binds, but the app on the phone still says the function is locked. Any suggestions?

EDIT: Got it! It's bind now. Trick was to bind it from the VVDI2 Transponder software, NOT from the Xhorse Update tool.
I'm getting tired of all the different update menus with Xhorse tools.

[Micko179]

Does anyone have any luck cloning ID46 chip for GM? I bought LKP-03 but they read ID46 (Hitag 2) My machine asks for TPX3? Says chip not supported?!

[newone]

Does anyone have any luck cloning ID46 chip for GM? I bought LKP-03 but they read ID46 (Hitag 2) My machine asks for TPX3? Says chip not supported?!

in latest updates they cutting off other chips one by one,sales policy,use their one chips and you will be ok

[drugowaz]

Or just not update the tool

[newone]

Or just not update the tool

hi friend,i thought this solution also,for now they bind users by id48 clonning,for me thats not an issue as i have rw4,but in a new updates when they add more things stay in an old software version will not be an option,in conclusion using their chips is not so much expensive,also i can understand them,they selling hardware cheap and they must make money from somewhere,for that i can not blame them,if you compare rw4 or keyline with keytool in price i can say its worth every euro

[drugowaz]

I dont use it much. Only few options . So update it rarely.