W906 2015+ SKC star key calculator error

[Edc17tricor3]

Hi, I have a problem with sprinter w906 2015 year.
Mcu mask is always 0L01Y But when i open dump with SKC calc it give me an error "loaded dump not correct"

I tried to generate keys dump with vvdi mb tool and it work (key work and actived)

Someone know if there is a sw working with offline generator that work good with this new thype of dump?
Read with r270, with xprog and with vvdi prog always same file (exactly the same)

[mercis]

2015 dump new for skc,check version datum

[Edc17tricor3]

2015 dump new for skc,check version datum

I use skc 1.0.1.2
Dump is w906 year 2015

It show me "dump not correct"
If I load the same dump on vvdi mb prog it generate key correctly

[Jan1980]

How did you read the mcu ?? For example, if i load a dump with my genuine AVDI, i cannot open in SKC, too. Dump is crypted. I can only calculate keys and make new keys with AVDI..

[mercis]

skc old for 2015 dump

[daxxer]

I use skc 1.0.1.2
Dump is w906 year 2015

It show me "dump not correct"
If I load the same dump on vvdi mb prog

oh god so much not usefuls post's....show first your dump, then we can take a look, why not loaded correctly in your SKC

[Edc17tricor3]

oh god so much not usefuls post's....show first your dump, then we can take a look, why not loaded correctly in your SKC

Added to first post

[daxxer]

Added to first post

by me worked in SKC without any problems, I try to use more SKC versions from oldest 1.0.0.5 what i have to newest 1.0.1.2 and all success

906.jpg

...but need little reworked before read it in SKC the all data are the same as in anyone W906, but little moved to another adress in eeprom memory
what tool you use for reading from MCU eeprom ????

reworked dump here :: W906.DK.rar

[Edc17tricor3]

by me worked in SKC without any problems, I try to use more SKC versions from oldest 1.0.0.5 what i have to newest 1.0.1.2 and all success

906.jpg

...but need little reworked before read it in SKC the all data are the same as in anyone W906, but little moved to another adress in eeprom memory
what tool you use for reading from MCU eeprom ????

reworked dump here :: W906.DK.rar

You are the best!
Infinite thanks!

I read with r270, xprog, and vvdi prog same dump

[daxxer]

You are the best!
Infinite thanks!
I read with r270, xprog, and vvdi prog same dump

i'm sure not the best, sure exist somebody who can be better

bow.png

[szpryczek]

by me worked in SKC without any problems, I try to use more SKC versions from oldest 1.0.0.5 what i have to newest 1.0.1.2 and all success

906.jpg

...but need little reworked before read it in SKC the all data are the same as in anyone W906, but little moved to another adress in eeprom memory
what tool you use for reading from MCU eeprom ????

reworked dump here :: W906.DK.rar

Hello friends can you help me too I have dump from spriter eis 2015 with mask 0l01Y and my skc say dump not correct can you rework dump?

[szpryczek]

I did self base on example in post thx

[ser1374]

Hello. Same problem. Help SKC does not read the working dump.
Volkswagen crafter 2008. mask 0L01Y. Edit my dump. So that I can read it with the SKC calculator. What needs to be edited so that the dump is normally read by SKC. Thanks. How to upload a file to a website. Explain to the fool.
pull out the key files, someone help!!!!
Thanks.

[rob h]

Skc does MB.
Not Vag. And no US MB with Crafter lookalike eis.

You will need a tool, that can add transponder direct to dump.
Or a dump decoder. So you can precode transponder with cs, and program these with pin.


Have a look on DK, and you will see.

You could post dump, and maybe someone will help