Mechix (13th July, 2019)
Hello friends,
i am looking for help withimmo off
ECU Lada Niva 1.7i year 2015
I send photo ECU and immobox
0261S06590
B515HC02
212-1411020-60
Thanks
IMG_20161209_104601.jpgIMG_20161209_104612.jpgIMG_20161209_104622.jpgIMG_20161209_104640.jpg
Mechix (13th July, 2019)
Did you read this unit? If yes, post it.
I did not find
EEPROM 95080
or 24C02
I do not know whether is not masked
Immo is in internal EEPROM. You need read and write Tricore via BSL. Clear (not learned) EEPROM in attachment.
adiadam (21st September, 2018), asto (16th June, 2023), autobuggy (11th March, 2022), Bipeti (13th April, 2023), Boras (8th November, 2017), cubica1 (7th October, 2023), eeprom241 (24th October, 2018), Elektrik001 (31st October, 2018), ELETTRA64 (22nd May, 2019), gsmpuky (12th April, 2021), KADE007 (2nd October, 2022), kiwi1hu (22nd May, 2017), konop11138 (10th May, 2019), lounadak (28th January, 2021), mcgywer (3rd November, 2022), m_toy (1st October, 2022), olo_3 (20th March, 2019), Pablo98 (17th December, 2022), puiu (17th October, 2019), rrr500 (5th February, 2022), system (30th October, 2017), t-ortman (6th January, 2023), tamaszek369 (19th July, 2019), tibor8475 (9th December, 2016)
Your file is immo off?
Yes. Clear EEPROM allows an unlimited number of engine starts. This approach applies for all Lada M7.9.7 and ME17.9.7.
pokusmaster (18th January, 2021), tibor8475 (11th December, 2016)
Hi chiplab,
immobox be disconnected? tomorrowI will be doing
T
You can do not disconnect. If you disconnect, you need to close the contacts 9 and 18 - join diagnostic line bypassing immo unit. To be able to diagnose through OBD-connector.
all is ok thanks chiplab
T
working , thank´s you
work only one day. But i have solution for this
must diconnect relay and connect like on the picture
DSC_0115.JPG
woking 100%
Hello,
does this work with the B515HB01 too?
Which programm to use? and what interface to programm?
Thanks
-- edit --
I use the Galletto 4 v54 China clone. The eepom file from above works great with the B515HB01.
Now lada is running again.
Last edited by Masterclonk; 25th October, 2018 at 07:50 AM.
Hello,
It's possible to have the process to clear EEPROM.
I have the same ECU with a problem with Immo.
I don't know the software and the adapter.
Thanks for your help.
immo off with new trasdata.
it works perfectly !
i can upload special dump, for clear immo on bosch me1797 only, without BSL.
Bookmarks