Hi guys friend broke a key im tryin to cut a key for him,can some one please check if this bitting is right.
car is volvo 2001 HU56 instacode shows me this but key wont work
bitting:
3222431120170126_202330.jpg
thanks!
Hi guys friend broke a key im tryin to cut a key for him,can some one please check if this bitting is right.
car is volvo 2001 HU56 instacode shows me this but key wont work
bitting:
3222431120170126_202330.jpg
thanks!
Auto Locksmith,Tuning,Dpf Removal,Dtc Removal,Immo Removal,Ecu Adaptation,Crash Data-Clear.
Correct bittings. What machine do you use?
gttuning (26th January, 2017)
miracle A6 from lock decoders..
so what i do wrong here the cut key shows proper bitting when i decode it.
Auto Locksmith,Tuning,Dpf Removal,Dtc Removal,Immo Removal,Ecu Adaptation,Crash Data-Clear.
Post photo of cutted key
Sent from my SM-G935F using Tapatalk
Auto Locksmith,Tuning,Dpf Removal,Dtc Removal,Immo Removal,Ecu Adaptation,Crash Data-Clear.
This is a key that A6 cut i update software and calibrated the machine
Sent from my SM-G935F using Tapatalk
Auto Locksmith,Tuning,Dpf Removal,Dtc Removal,Immo Removal,Ecu Adaptation,Crash Data-Clear.
It cut too low. Bitting No.1 should be aligned with that groove above.
just4upal (30th January, 2017)
Yes seen that but how can i correct this ?
Sent from my SM-G935F using Tapatalk
Auto Locksmith,Tuning,Dpf Removal,Dtc Removal,Immo Removal,Ecu Adaptation,Crash Data-Clear.
If i put that key to A6 and decode it bitting comes 32224311 so machine is fault?
Sent from my SM-G935F using Tapatalk
Auto Locksmith,Tuning,Dpf Removal,Dtc Removal,Immo Removal,Ecu Adaptation,Crash Data-Clear.
What about cutting other keys? Is good or no? If good make a new profile in pc application by instacode information and try. My chinese x6v8 only cut well from pc
This is first key that i have trouble on A6 and i try cut by instacode.did not help
Sent from my SM-G935F using Tapatalk
Auto Locksmith,Tuning,Dpf Removal,Dtc Removal,Immo Removal,Ecu Adaptation,Crash Data-Clear.
measure each cut and see how far off each cut is with instacode measurements
gttuning (27th January, 2017)
Have you calibrated distance between cutter & decoder? What setting are you using for sense?
Sent from my SM-G930F using Tapatalk
Auto Locksmith,Tuning,Dpf Removal,Dtc Removal,Immo Removal,Ecu Adaptation,Crash Data-Clear.
Bookmarks