Hello, I have a 2002 E46. I need help coding used DSC 5.7 to vehicle using Winfkp or tool32.
I don't know what to do, I have tried doing with some info I received online. But it always tells me coding invalid or something like that
Hass42
Hello, I have a 2002 E46. I need help coding used DSC 5.7 to vehicle using Winfkp or tool32.
I don't know what to do, I have tried doing with some info I received online. But it always tells me coding invalid or something like that
Hass42
try with ista/p or better dis
sonikx (27th March, 2020)
this manual will help you to get it done with NCS expert
antwnhszr (22nd February, 2017), Astrator (7th April, 2018), Col19 (13th November, 2019), dave11674 (17th March, 2018), dmp (25th February, 2017), ecufix (22nd February, 2018), Faraday (3rd March, 2018), Frankcar (18th March, 2018), hass42 (16th June, 2017), rawen (12th July, 2017), sonikx (27th March, 2020), vlad33 (17th March, 2018), zuzuss (18th February, 2017)
Winkfp is for programming, you should use NSC for coding and with use of NCS dummy it's very easy to do.
Last edited by Gavra; 18th February, 2017 at 01:24 PM.
Guided fault finding = Feature that many factory scan-tools have and real technician despise it.
alektkac (13th November, 2017), Astrator (7th April, 2018), Col19 (13th November, 2019), cosmin12345 (2nd July, 2017), cubica1 (3rd March, 2018), dmp (25th February, 2017), ecufix (22nd February, 2018), fabrag (17th January, 2018), Faraday (3rd March, 2018), hass42 (16th June, 2017), Mr Mo (28th February, 2017), sonikx (27th March, 2020), Stelaras (20th April, 2017), tourettes (19th March, 2018)
download NCS Dummy to help
Hi guys
im new to bmw icom/ista
i bought myself one pre installed on a laptop ready to graft
my friend has asked me to code him an ABS. Module into his 2008 3 series
the unit was changed due to faults
can anyone give any pointers please
thanks
Last edited by dave11674; 17th March, 2018 at 11:47 PM.
Tools owned.
AVDI commander.
Dashfixer orig.
Dashfixer clone.
Fiat km tool.
Opel km tool.
Ford KM tool.
Op--com colne.
Lexia & PP clone.
Smok PSA, volvo & ford
If someone helps you DONT FORGET TO SAY THANKS its only polite....
open ista P to do software update. it will ask you if any control modules been replaced, select ones that you replaced, it will ask you if you want update whole vehicle or partial, select partial, select main modules only, dont touch anything audio related. main modules like engine, trans, cas and frm and of course abs in your case, then let software do the job, it will update and code everything selected. make sure battery charger connected.
When you have ISTA/P with expert mode, it won't ask you if you want to update the whole vehicle or partial, you have to manually de-select all audio related modules like this:
https://www.youtube.com/watch?v=IMwVN2o4U8A
If you just de-select everything except DSC (the ABS module), it will figure out which modules it thinks it really needs to update and will re-add them when you click determine measures plan.
Last edited by tomvleeuwen; 18th March, 2018 at 08:46 PM.
Bookmarks