Need Beeprog Soic pinout adapter

[SunRise]

its a genuine Beeprog2 and paied 1200€

Ouch!

Expensive mistake.

[gopelhu]

Hello,

How have pinouts for soic adapters for the Beeprog2?


Thanks

Hi,

All Elnec products (like beeprog,beeprog+,beeprog2...etc) with 48pins connector are the pinout up to 48pins to pin1 to pin1....... pin48 to pin48.

Which soic ic do you need to read/write? I have some original adapters with protel 99 se pcb files.



Regards,G

[Youneselm]

Hi,

All Elnec products (like beeprog,beeprog+,beeprog2...etc) with 48pins connector are the pinout up to 48pins to pin1 to pin1....... pin48 to pin48.

Which soic ic do you need to read/write? I have some original adapters with protel 99 se pcb files.



Regards,G

Hi mate,
Could you share all those and post them here?
That wil be so awsome and kindfull.
Thanks in advance mate.
Br

[einet]

Hi
This info help many members, me also.

Try to read 93c46 or 56 not read error on some pins.
35080 not read also
95080 not read erro on pins
95160 not read error on pins

i lost all what i can not read, i use Carprog or UPPAs to read eerpoms

[antwnhszr]

i have BEEPROG 2 original from elnec and is very good and stable programmer.the true is for the adapter's and the ISP programming it's litle coplicatated.....
reard's

[SunRise]

Hi,

All Elnec products (like beeprog,beeprog+,beeprog2...etc) with 48pins connector are the pinout up to 48pins to pin1 to pin1....... pin48 to pin48.

Which soic ic do you need to read/write? I have some original adapters with protel 99 se pcb files.



Regards,G

Not correct - as I stated they changed the pricing model to make more $$$/???/<insert currency here>

http://www.ebay.co.uk/itm/BOTTOM-TSO...MAAOSw2xRYTtMz

Here is the bottom part of one of there TSOP48's. No need for a 48pin - but see the extra block and the eeprom/other chip infront of it. This maintains the count of the number of times used and the elnec software uses this to refuse to work after limit reached.

[gopelhu]

Hi mate,
Could you share all those and post them here?
That wil be so awsome and kindfull.
Thanks in advance mate.
Br

Hi mate,

here are and enjoy !!!!

I removed the attchen files bec nobody give me the thanks or....

Regards, G

[gopelhu]

Not correct - as I stated they changed the pricing model to make more $$$/???/<insert currency here>

http://www.ebay.co.uk/itm/BOTTOM-TSO...MAAOSw2xRYTtMz

Here is the bottom part of one of there TSOP48's. No need for a 48pin - but see the extra block and the eeprom/other chip infront of it. This maintains the count of the number of times used and the elnec software uses this to refuse to work after limit reached.

Hi

This is only NOR flash I hate this NOR flash adapter...

I said the all 27,28,29F flash to pin1-to pin1....and NOT a NOR flash ....

Regards, G

[cubica1]

I can't believe what I'm hear here...I have Beeprog orig from Elnec (ok..it's discontinued tool) ..it is fantastic tool, but now..ISP tokens, soic8 adapters are not 1:1 ?? I just can't believe, what's happen to Elnec, they will loose a lot customers on that way. Sadness.
regards,
cuby

[Youneselm]

Hi mate,

here are and enjoy !!!!

Regards, G

Good work mate!;-)


Press Thank and Reputation If info was helpfull.
Always there to help people