I have the same problem unfortunately, still looking for a solution...
I have the same problem unfortunately, still looking for a solution...
check read cable com (rs232) and plug power 12v xprog
navatar (28th July, 2017)
If you want to read and write spc with a low budget programmer look at the segger jtag on ebay and you will be
happy with that interface ( little bit confusing software interface but nice working ) you kan read and write without
errors and problem that kind of processor , i was in trouble with xprog and at the end downgraded and working good
for now only with older software
REGARDS
navatar (28th July, 2017)
The verify errors in xprog is the software. I've noticed on a fresh install I can open the program and have no trouble programming the first 2 or 3, after that I get Verify errors
the solution that worked fine and tested for all my friends
Dacia_v2 spc560p50l3 v2 xprog pinout.jpg
beongo (7th July, 2020), mexanico1971 (17th June, 2020), navatar (28th July, 2017), raskolnikov1975 (4th February, 2019)
when use xprog im off internet connection.
navatar (28th July, 2017)
navatar (28th July, 2017)
Hi everyone thanks for solutions resolved it by setting the X-Prog COM port latency in device manager to 1ms instead of 16.
ivantolobrabus (8th October, 2018)
Spoke too soon still have errors going to try direct rs232 and 12v tomorrow
Hi don't think software is at fault as I did fresh install of Xprog 5.55 on a new computer which was never connected to internet and problems are same
repairmymodule (29th July, 2017)
True
Is not actuall programmer crack software problem m8
As stable with original as War of something i believe ./.........
With me, the software is the case. 100% sure about it. I have clone xprog box 5.55
Hi guys thanks for all the help finally got a solution for SPC560 verify errors used a different software version mutec99 on MHH titled "XProg 5.55 no dongle". Link is attached
heatgun (23rd December, 2018), repairmymodule (30th July, 2017), Sarah1331 (3rd February, 2019), YASS59 (25th August, 2020)
Bookmarks