CID - 6847
Hi all!
I bought VDO Siemens CD70Navi (13188477, LQ) with Siemens CID (24461297, DB). It is coded. Seller says - do not know of any code.
OP-COM says it's paired. But it seems like DIS and EHU from different cars, because the message "Display Safe" appears after swith on.
Using EZP2010 and clip I read dump CD70 from 24c64 and dump CID from 93c66.
But, when I read dump from CID, every time it's different.
Is it possible to read dump from CID without de-soldering chip?
Is it a correct chip for reading?
Can you help me?
UPD. After changing type of chip to AMTEL AT93C66 8bit I think received dump is correct
It's here, CarPass 6487?
Last edited by bank; 10th February, 2017 at 08:33 AM.
CID - 6847
drahe, thnx.
And what about CD70?
2all: Who can help with making delivery state for these CD70 and CID dumps?
Last edited by shooting; 10th February, 2017 at 10:37 AM.
----------------------------------------------------------------------------------------------------------------------------
Don't confuse "Standing on my Shoulders" with "Treading on my Toes" ..
OK, I see. Got it!
code 2608.............
CID and CD70 was paired using 6847 successfully.
But ... after pairing EHU and DIS reboots and sound from CD and FM disappears
Unpair doesn't help. I hear "beeps" with display safe message, but sound from CD/Radio.
Navi works with sound.
Any ideas how to fix?
Looks like your screen is in Delivery Mode, you need to use OPCOM/TECH2 to set it to paired
wbr
SEE:
If you see "DISPLAY SAFE" flashing every 10 seconds, this means that the Display
is currently in Delivery Mode, and is now ready to be programmed to the vehicle
with a OBDII programmer.
----------------------------------------------------------------------------------------------------------------------------
Don't confuse "Standing on my Shoulders" with "Treading on my Toes" ..
Yes. As I say earlier, DIS and EHU was paired successfully (without any SAFE massages). But after pairing sound from radio and CD dissapears.
So, I unpair devices to delivery mode, after that a hear "beeps", and still no sound from FM/CD.
But, problem with sound was solved for me by resetting EEPROM via extended SETTINGS menu (press "Main", then "Setting" for 10sec until the message "Test mode switched on", then "BC", then "Audio" some times untill come to a screen with checkboxe "Reset EEPROM")
Thanks a lot!
shooting (10th February, 2017)
Hi i ordered a KS CID and seller said he doesnt know the code i can read the eeprom my friend has xprog and upa can anyone help me to unregister it when it arrives any day now?
Post dump here and you'll receive pin
Will do as soon as it arrives thnx in advance
Hello screen arrived can anyone help me with the pinout of the CID so i can test it before i connect it to my car
Bookmarks