FAST + FURIOUS ZGEMMA h2.s open atv 5.3
Register
Results 1 to 4 of 4
  1. #1
    Junior Member
    Join Date
    Jul 2014
    Posts
    22
    Thanks Thanks Given 
    0
    Thanks Thanks Received 
    13
    Thanked in
    7 Posts

    Default FAST + FURIOUS ZGEMMA h2.s open atv 6.1 FOR IPTV







    so here we go this image is for zgemma H.2S

    open atv 5.3
    cachefush
    epgimport
    auto bouguets maker

    the new slyk1 skin









    Customised boot/reboot screens








    Instructions:

    Before you flash make sure both coax cables from the dish are connected to the correct ports, as show below


    cables should be diagonal as you look at them not one on top of the other and not side by side.




    before u flash make sure all SD CARD/FLASH DRIVES ARE REMOVED

    To Flash...

    1) Extract the downloaded file and copy the zgemma folder to your fat32 formatted usb drive.
    2) Turn off your zgemma box using the rear on/off switch as shown above.
    3) Insert your USB pen drive in the rear port of your zgemma.
    4) Power up the box, when USB is displayed press the front power switch, the display will change to FL5H (Flash!) allow it to boot up – This should take between 3 to 10 minutes

    NB If the box boots straight up without flashing it's usually down to a usb drive formatting / partition issue (please search the forum for hddguru as this has been asked loads of times!)


    Once flashing is complete the box will display BOOT, turn off using the rear power switch and remove your USB drive that has the zgemma folder on it, either delete this folder on your PC or give it a quick format if you are going to use this same drive in the box permanently, alternatively remove and insert your second USB pen drive.


    Steps to take after flashing....


    1) Initialise your USB pen drive or SDCARD .....(BLUE Button, scroll down to Hardisk, Initialisation) then (Convert Ext3 to Ext4)

    2) Now check it's mounted.... (Mounts, Device Manager, GREEN Button, BLUE Button, Exit on remote then RED button)











    4) If your box is a Zgemma h.2S and you have two cables coming from your sat dish skip to 5).
    If you have a Zgemma HS, H2H or H2s you need to reconfigure tuner B otherwise you will get a tuner lock error on the next step. To do this press BLUE then go to tuner setup, tuner configuration - if you have a hS or you're running a h2S with one cable from the dish set tuner B to none, if you have a H2H/H2S set your second tuner here.

    5) Scan for channels...... (go and make a coffee this takes a while! but you only have to do this one time!)
    (Menu, Setup, Service Searching, Automatic Scan, Green)

    6) Now to change to your local region.....
    (Menu, Setup, Service Searching, AutoBouquetsMaker, AutoBouquetsMaker Providers and scroll down and change where it's currently set as Granada-custom to yourtvregion-custom then press GREEN)

    7) Create your Autobouquets
    (MENU, Setup, Service Searching, AutoBouquetsMaker, Delete bouquets, Yes, Start Scan)

    8) Create USB swapfile - 256mb
    (MENU, Infopanel, Plugins, SwapManager, GREEN, Select your drive, 256Mb, takes a couple of mins to create, once created choose RED to activate and YELLOW to autostart, then exit)

    9) Restart box - (MENU, Standby / Restart, Restart)



    http://www.mediafire.com/file/m86b2i...936/zgemma.rar -------- new link
    Attached Images Attached Images
    Last edited by fudge1; 13th August, 2017 at 10:54 PM. Reason: NEW UPDATE

  2. #2
    Junior Member
    Join Date
    Jul 2014
    Posts
    22
    Thanks Thanks Given 
    0
    Thanks Thanks Received 
    13
    Thanked in
    7 Posts

    Default

    huy guys i have a new backup so dont use this 1 thanks
    Last edited by fudge1; 6th August, 2017 at 04:23 PM.

  3. #3
    Mr. DK DJ
    maca's Avatar
    Join Date
    Feb 2009
    Location
    liverpool
    Posts
    6,309
    Thanks Thanks Given 
    473
    Thanks Thanks Received 
    1,145
    Thanked in
    623 Posts

    Default

    Ok we will thanks

  4. #4
    Junior Member
    Join Date
    Jul 2014
    Posts
    22
    Thanks Thanks Given 
    0
    Thanks Thanks Received 
    13
    Thanked in
    7 Posts

    Default

    any feed back be great guys good or bad thanks

 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.