VW EDC17 CP14 Pin SKC

**learing1** · 24th February, 2017, 03:48 AM

Can someone help me extract the PIN/SKC for this ECU. I need it so I can program a new key to the car.

Thank you.

EEprom_1037511996.zip

**yugo45** · 24th February, 2017, 05:17 AM

Are you kidding !!!!!!!!!
Pin will not help you to program keys to cars with EDC 17, you need to have very good tool like VVDi, SMOK X-Dash , AVDI and etc and spend $$$$$.

**learing1** · 24th February, 2017, 05:18 PM

Hi with the SKC I can program the key by diagnostic after security access.
The key is already pre-coded.

I need the SKC from the car to do so and I know its in the EDC17 EEPROM.

FYI VVDI can not access the dash type on this car.

**SergeyGrodnoBY** · 24th February, 2017, 07:00 PM

Impossible to get the Immo data only by EEprom file! Read IntFlash!
And What is the car?

**yugo45** · 24th February, 2017, 07:20 PM

Originally Posted by learing1

Hi with the SKC I can program the key by diagnostic after security access.
The key is already pre-coded.

I need the SKC from the car to do so and I know its in the EDC17 EEPROM.

FYI VVDI can not access the dash type on this car.

What kind of car is it ?

**haroutioun** · 25th February, 2017, 09:20 AM

Hello.
the eeprom dump show us the car is Jetta 2011.and this car has remote key as same golf 6 keyless Entry 5K0 837 202 F 315MHZ.did the car has working key? and you want to do spare key? if the car don't has working key so vvdi2 can't let you continue, need to go service mode... if car has working key so you must choose the correct dash from menu of vvdi2 to let you continue to add key..

**yugo45** · 25th February, 2017, 05:54 PM

^^^^^^^Thank you Haroutioun,

So in this car Pin will not help , No way to adopt key with Pin in this car.

2011 works perfect with VVDI if you know what to do. Above is well said how to do it.