If eeprom not corrupt,then it will work ...
If eeprom not corrupt,then it will work ...
You use srs units files at your own risk. I am not responsible for any damages. Don't ask about passes, one file=one pass.
If I helped, please, use magic buttons reputation+thanks.
Best regards.
Dragon
smirnoff_rules (28th March, 2017)
Part of immboliser on cordsa d
if your unsure let Z786 screw it up
Was Banned For Being Certifiably Insane and Stupid
think lm going to get this guy to send it off for repair l dont think swapping eeprom is enough , havmt got enough info to risk just swapping
any information provided is for educational/experimental purposes only.
if same part numbers etc then swapping eeprom from old to new will work
whys the old 1 damaged?
if not been in a bump etc is it water damage ?
and personally i would be checking the car ecu not the srs module
these cars are prown to get water in the ecu
smirnoff_rules (29th March, 2017)
had a look today and this has the ecu on the inlet manifold and looks fine , customer is saying she didnt jump start any other cars
any information provided is for educational/experimental purposes only.
have you opened the ecu?
any dry joints etc?
its at other shop , they wanted to know if l can swap eeprom and now they ordered one , l havnt got time to do there jobs aswell as mine
any information provided is for educational/experimental purposes only.
ok l tried swapping eeprom and car started but still have same fault, launch says this
here the original eerpom read can anyone see if theres a problem in it please or clears faults ?
cheers
any information provided is for educational/experimental purposes only.
Cool, you got eeprom lifting reading & writing facilites
bigger imprivement on metering a rover rotor arm with 10M resistir and condeming it.
see if any of your naybour garages has autel ms708, read the pin with it
see if the number matches in your dump
then see if you can clear code out eeprom of usex one and recode
ulload dump of usex ecu
Was Banned For Being Certifiably Insane and Stupid
Can you check your pin is 5384 ? Try join old srs unit and check if coding possible with this pin 5384.
Last edited by dragon100; 30th March, 2017 at 07:36 PM.
You use srs units files at your own risk. I am not responsible for any damages. Don't ask about passes, one file=one pass.
If I helped, please, use magic buttons reputation+thanks.
Best regards.
Dragon
can do , does the eeprom read look ok ? looks close to the one read from spare ecu
any information provided is for educational/experimental purposes only.
File look good , I compare with some from corsa D and it is ok.
You use srs units files at your own risk. I am not responsible for any damages. Don't ask about passes, one file=one pass.
If I helped, please, use magic buttons reputation+thanks.
Best regards.
Dragon
smirnoff_rules (30th March, 2017)
thanks that will do me . he will have to sort this car himself , l said l would check this out , if units ok he will have to fix , have to much of my own work to do his too
is it possible to get pin for the one l bought from ebay , ?
Last edited by smirnoff_rules; 30th March, 2017 at 08:22 PM.
any information provided is for educational/experimental purposes only.
6936 is pin
for secondhand ecu
smirnoff_rules (30th March, 2017)
Bookmarks