Zgemma single tuner - good to use on a motorised system - Page 2
Register
Page 2 of 2 FirstFirst 12
Results 16 to 21 of 21
  1. #16
    V.I.P. Member
    digicon's Avatar
    Join Date
    Jul 2009
    Posts
    8,261
    Thanks Thanks Given 
    1,003
    Thanks Thanks Received 
    2,862
    Thanked in
    1,742 Posts

    Default

    If you loaded Catseye channel list via Dreambox edit and then decided to download Vhannbals plugin and update via the plugin then yes Vhannibals list would overwrite Catseye, with Vhannibal Plugin it really is made for the lazy person Press green button for plugins choose Vhannibal updater and then choose the channel list you want to download to the box everything takes about 20 seconds and your done, Faster than getting to a laptop loading DBedit then firing over a channel list.

    if you set Vhannibals plugin to Autoupdate it updates without you lifting a finger


  2. The Following User Says Thank You to digicon For This Useful Post:

    charlie567 (13th April, 2017)

  3. #17
    Member
    Join Date
    Mar 2013
    Posts
    50
    Thanks Thanks Given 
    13
    Thanks Thanks Received 
    4
    Thanked in
    4 Posts

    Default

    I have got dreambox edit downloaded and the catseye motorised list

    however you have mentioned the Vhannibals plugin here

    http://www.digital-kaos.co.uk/forums...o=file&id=2959

    sorry to ask but how do you install this plugin ?

    is there a download section in one of the openvix menus and from this l can select this plugin or simply Download the plugin from your link then install in which folder ?

    thanks again for your patience

  4. #18
    V.I.P. Member
    digicon's Avatar
    Join Date
    Jul 2009
    Posts
    8,261
    Thanks Thanks Given 
    1,003
    Thanks Thanks Received 
    2,862
    Thanked in
    1,742 Posts

    Default

    you can download the Plugin directly from the Plugin feeds, or install the .ipk from the link and let it upgrade from V 1.1 to 1.4.

    I dont use OpenVix sorry so i assume the Vhannibals plugin is in there feed
    Last edited by digicon; 13th April, 2017 at 06:26 PM.


  5. The Following User Says Thank You to digicon For This Useful Post:

    charlie567 (13th April, 2017)

  6. #19
    Member
    Join Date
    Mar 2013
    Posts
    50
    Thanks Thanks Given 
    13
    Thanks Thanks Received 
    4
    Thanked in
    4 Posts

    Default

    thanks again.
    I have got the box, loaded the channel table but struggling to get any signal on any channels
    I left the old box on 0.8 west
    powered the edision, set the long and lat for birmingham
    but when l look for 0.8 west - its slightly out

    when l go to positioner setup and move it so l get signal, everytime l come out of the menu, it moves the dish again, so l cant find any signal
    I cant save the setting once l come out of the menu...which is frustrating. I cant seem to save the position of the satellite when the menu is exited


    If l try and switch off USALS, the dish does not move in Disqec 1.2 setting

    the satellite signal is displayed in the top corner - assuming it means the dish is moving. Really struggling at the moment to get any signal on any channels....

    any help would be appreciated to get the usals working please or Disqec

    update.....just seen the green store button after moving dish...gutted...
    will try 13 and see if l can tune that in and then 16, 19 and 28.2

    Looking a bit better now, stored 28.2 east and 13 east :-)
    Last edited by charlie567; 13th April, 2017 at 05:17 PM. Reason: maanged to store channels

  7. #20
    V.I.P. Member
    digicon's Avatar
    Join Date
    Jul 2009
    Posts
    8,261
    Thanks Thanks Given 
    1,003
    Thanks Thanks Received 
    2,862
    Thanked in
    1,742 Posts

    Default

    If using Diseqc 1.2 you have to use the Advanced option in the Tuner Configuration setting and then number differently every satellite you want to store so say 13,19,23,28 etc..

    Then goto the sat finder and move dish in small increments either east or west until you find the best signal for that particular satellite once done make sure the Number of the satellite corresponds with your saved number job done


  8. The Following User Says Thank You to digicon For This Useful Post:

    charlie567 (13th April, 2017)

  9. #21
    Member
    Join Date
    Mar 2013
    Posts
    50
    Thanks Thanks Given 
    13
    Thanks Thanks Received 
    4
    Thanked in
    4 Posts

    Default

    Nearly all sorted mate, thank you so much for your help
    Couldnt have done this without your help!!

    I will look at the bluetooth another time, main thing is to get the satellite positions stored and Sea Lion sorted out.
    Didnt know that you had to download the plugin for Emulators....learning all the time here :-)
    Last edited by digicon; 13th April, 2017 at 08:15 PM. Reason: Edited for Forum Rules

 

 
Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.