hello is it possible to find Pin code from ecu by file?
old ecu is dead and i got new i tryed to make immo off but still got safe in dash.
ecu is edc17cp46
audi q5 mciro original.rar
hello is it possible to find Pin code from ecu by file?
old ecu is dead and i got new i tryed to make immo off but still got safe in dash.
ecu is edc17cp46
audi q5 mciro original.rar
Immo 5. Doesnt have pin code if i remember right
IMMO Version 5
TPROT_V02.05.0116 TC1767
CS: 8C5F917FD07FF083811CA0870792A82C
Immo 5+
Pin 01927
Porshe & VAG EDC17/ MED17 clone, adaptation, immooff, change Power Class. BCM2 clone, ELV synchonisation, adaptation.
Powerclass : 6A
Porshe & VAG EDC17/ MED17 clone, adaptation, immooff, change Power Class. BCM2 clone, ELV synchonisation, adaptation.
Here are the most accurate and correct data)
On this ECU immo off not possible , Only possible data transfer form original ECU or BCM2.
Also there is no way to program it with Pin. Pi was used in Immo 3 and some early Immo 4 , late Immo 4 and Immo 5 not going to happen.
I can do immoff for Immo 5 without dash error.
Porshe & VAG EDC17/ MED17 clone, adaptation, immooff, change Power Class. BCM2 clone, ELV synchonisation, adaptation.
doctore (27th May, 2017)
[Quote = yugo45; 3.040.069] In questa immo ECU off non possibile, solo possibile forma di trasferimento dati centralina originale o BCM2.
Inoltre non v'? alcun modo di programmarlo con il Pin. Pi ? stato utilizzato in Immo 3 e un po 'presto Immo 4, in ritardo Immo 4 e 5 Immo non accadr?. [/ QUOTE]
I can do it without safe in dash
bcm2 elv adapt online offline -echange immodata -clone immodata sinchro bcm elv medc17 edc17 Crafter EZS e EDC17 sinchro -DPF/ EGR/ DTC/ removal/: IMMO ADAPT edc16 EDC17 edc17c64 C74 NOW WORKING MED17/MEV17/ VAG ecu clone full working all
PCR2.1 FULL CLONE ou adapt, clone all edc17 me17 , etc / dash echange immodata repair immodata add key etc etc
doctore (27th May, 2017)
wokcz (31st May, 2017)
UDS protocol ECU is not possible to do Immo off,
And all Immo 5 ECU has UDS protocol. You can do it in flash and delete code to not display in cluster , but car will start 3-5 times and will not work after that .
There was few posts about that , where people did it in flash and after 3-45 times start car , it will corrupt eeprom and car not start after that.
Only data transfer is 100% correct solution.
so know when i have pin cs and mac?
its not possible to code it with odis og vag?
Bookmarks