Reply With Quoteconnect a coil to the dash and but your key there the pins in dash are pin7 and pin8
Results 1 to 9 of 9
-
24th June, 2017, 04:25 PM #1Member
- Join Date
- Aug 2016
- Location
- Tychy
- Posts
- 44
- Thanks
- 17
- Thanks
- 9
- Thanked in
- 6 Posts
FVDI Immo reading problem from vw mk5 1k6 920 864
Hi,
i try use fvdi box [ vag v21
] to read immo data of vw mk5 cluster 1k6 920 864 and i read Conf Data
but i cant read immo Data ... want to swap clocks half fis to full one.
Come up in screen
....cannot enter boot mode make sure you have ignition on with working key....
FVDI 1.jpgFVDI 2.jpgBENCH.jpg
How can i connect key reader on bench to get acces to immo
ive done eeprom dump : - range 0x812 - 0x9BF in hex editor with FF FF so (immo is active) doesn't come on clocks
but still i cant read immo...
what i doing wrong ? ? ? or what im not doing right ? ?
I attach few pic of the bench
The for any advice'sLast edited by Panora; 24th June, 2017 at 05:53 PM.
-
24th June, 2017, 07:46 PM #2Top Poster
- Join Date
- Dec 2015
- Location
- Rafah, Palestine
- Posts
- 136
- Thanks
- 469
- Thanks
- 76
- Thanked in
- 61 Posts
Last edited by just4upal; 24th June, 2017 at 08:00 PM. Reason: wrong photo
-
24th June, 2017, 07:58 PM #3Top Poster
- Join Date
- Dec 2015
- Location
- Rafah, Palestine
- Posts
- 136
- Thanks
- 469
- Thanks
- 76
- Thanked in
- 61 Posts
connect a coil to the dash and but your key there the pins in dash are pin7 and pin8
VW 2007+ Golf, Passat, Eos, Touran, Tiguan, Octavia with Micronas.jpg
-
-
24th June, 2017, 10:15 PM #4Member
- Join Date
- Aug 2016
- Location
- Tychy
- Posts
- 44
- Thanks
- 17
- Thanks
- 9
- Thanked in
- 6 Posts
ok, Thx i try get some spare coil ...
did is possible to brake security and read that immo without key ? ?
I just done immo reading in tiguan 2012 color cluster 5N0920882C on 24C64 and no key ... but doesn't work on OLD MK5 :/ 2007....
-
25th June, 2017, 09:19 AM #5DK Veteran
- Join Date
- May 2016
- Posts
- 968
- Thanks
- 144
- Thanks
- 965
- Thanked in
- 501 Posts
ok, Thx i try get some spare coil ...
did is possible to brake security and read that immo without key ? ?
I just done immo reading in tiguan 2012 color cluster 5N0920882C on 24C64 and no key ... but doesn't work on OLD MK5 :/ 2007....
Works, use vag 18 or carprog.Last edited by naprawa5; 25th June, 2017 at 06:53 PM.
-
25th June, 2017, 09:24 AM #6Admin Assistant
- Join Date
- Nov 2008
- Location
- park bench, hedge bottom, police cell
- Posts
- 7,501
- Thanks
- 916
- Thanks
- 2,897
- Thanked in
- 896 Posts
English only in the forums
support mountain resue
support digital-kaos here
forum rules
no keygens or torrents to be posted no autodata discussions
pish pt walkers
-
25th June, 2017, 01:22 PM #7Member
- Join Date
- Aug 2016
- Location
- Tychy
- Posts
- 44
- Thanks
- 17
- Thanks
- 9
- Thanked in
- 6 Posts
Thx. i Try FVDI V18, V21... CARPROG , VAGTACHO and nothing ...
Originally Posted by naprawa5
-
27th June, 2017, 07:41 AM #8DK Veteran
- Join Date
- Sep 2011
- Location
- spain
- Posts
- 504
- Thanks
- 126
- Thanks
- 135
- Thanked in
- 60 Posts
put dash in boot mode after mod your eeprom whith fvdi.....also check power on ignition coil and two transistor from power source of dash....
-
The Following User Says Thank You to dune85872005 For This Useful Post:
Panora (30th June, 2017)
-
30th June, 2017, 09:12 PM #9Member
- Join Date
- Aug 2016
- Location
- Tychy
- Posts
- 44
- Thanks
- 17
- Thanks
- 9
- Thanked in
- 6 Posts
Reading working form the car by OBD but not on bench.
-
The Following 2 Users Say Thank You to Panora For This Useful Post:
gopelhu (20th January, 2018), raptureready (1st July, 2017)
Bookmarks