Can't seem to program key the alarm just keeps on going and car doesn't crank or start I used the mvp pro which is supposed to program it is says program success but nada
Any ideas is there something I'm missing?
Can't seem to program key the alarm just keeps on going and car doesn't crank or start I used the mvp pro which is supposed to program it is says program success but nada
Any ideas is there something I'm missing?
Try cycling door lock
"G" chip ? Toyota72 ?
correct chip is Mitsubishi61
Was id 62, tried cycling the door lock
Is that a laser cut key? or b110 keyway?
Laser cut / high sec
they are pretty easy to program, usually its simple - can't program - not the right chip
PierreTheron (5th July, 2017)
Did you figure out the problem? I repaired couple after different key Programming tools
Sent from my XT1650 using Tapatalk
had one today exact same 2010 uk mechanical key
turned alarm off with pin
tried id62 chip and id60 chip both said successful programmed but no joy
anyone know where immo data stored on these?
this car should come with 4d60 x100 pro can do the job easily
Last edited by eliaselias; 21st November, 2017 at 08:07 PM.
IF MY POST WAS HELPFUL DON'T FORGET TO GIVE ME LIKE AND REPUTATION... THAT WILL KEEP US HELPING OTHER'S
Bookmarks