Opel Astra III 1.7 CDTi 2007 error while writing
Register
Results 1 to 9 of 9
  1. #1
    DK Veteran
    Join Date
    Dec 2016
    Location
    Poland
    Posts
    339
    Thanks Thanks Given 
    199
    Thanks Thanks Received 
    31
    Thanked in
    25 Posts

    Default Opel Astra III 1.7 CDTi 2007 error while writing

    Hi!
    I do have a prblem with Astra III 1.7 CDTI 101 KM 2007.


    I have readed it with MPPS v16 and then wanted to write the mod with Kess using OBD. but I got error.
    I tried to do recovery via Obd Kess but it writes till the end and then i got a messege: "an error ocured during writing"

    When i tried to write it with MPPS I have an ID then is trying to start writeing and get:
    "An error have occured please go to C://MPPS/Logs and send all the data files to errors@amtcartech.com .... "


    Mod File and oryginal:
    Rogal1.7CDTi_Astra_Full1037390518_OK.rar
    OPEL Astra III 1.7 CDTi 2007.rar

    How can I solve it?
    The car doesn't start....
    Can I somehow take the ECU out and write it on the bench/ direct connection using KESS or KTag?
    I have opened the Kess but does not find any instruction how to connect that ECU using direct connection.

    I must ad that i have tried to write the oryginal file and the mod file but always it is the same.


    How to repair it?


    Thanks, in advance
    Kuba

  2. #2
    DK Veteran

    Join Date
    Feb 2010
    Location
    Bosna
    Posts
    550
    Thanks Thanks Given 
    135
    Thanks Thanks Received 
    207
    Thanked in
    134 Posts

    Default

    If it is edc16 ecu, you have to open ecu and write flash over bdm. Find flash for your ecu read over bdm here on dk or search on google.

    You can write ecu over bdm with galleto, ktag, bdm100....
    Good Luck

  3. The Following User Says Thank You to mvekaz For This Useful Post:

    kubuswujo (20th July, 2017)

  4. #3
    DK Veteran
    Join Date
    Dec 2016
    Location
    Poland
    Posts
    339
    Thanks Thanks Given 
    199
    Thanks Thanks Received 
    31
    Thanked in
    25 Posts

    Default

    It is EDC16 Ok i do have KTag nad Galleto i will try to write flash over bdm. which protocol should I use? 9?

    Maps are in flash? or eprom, micro?

  5. #4
    DK Veteran

    Join Date
    Feb 2010
    Location
    Bosna
    Posts
    550
    Thanks Thanks Given 
    135
    Thanks Thanks Received 
    207
    Thanked in
    134 Posts

    Default

    Flash is your problem. Flash is empty , all, not just part, su you need full bdm flash to write in ecu.
    In attacment there is file from my arhive, try write over bdm and see what will hapend.After ecu become live, write your original file with mpps over obd. Open ecu is not so easy, meybe is good idea to find someone who will do that for you.
    Good luck.
    Attached Files Attached Files
    Last edited by mvekaz; 20th July, 2017 at 06:04 PM.

  6. #5
    DK Veteran
    Join Date
    Dec 2016
    Location
    Poland
    Posts
    339
    Thanks Thanks Given 
    199
    Thanks Thanks Received 
    31
    Thanked in
    25 Posts

    Default

    Ok, so now i have made a backoup using KTAG separetly:
    backoup separetly astra h 1.7 EDC16 KTag bdm.zip

    And KTAG Backoup in one file:
    Opel Astra H 1.7 Backoup together KTag.zip

    And here are the full and the data only files witch i have read before, and they were working:
    OPEL Astra III 1.7 CDTi 2007.rar


    But now I am using KTAG and Protocol NR. 7 BDM.
    and been writing full flash file oryginal.

    And the engine does not want to start;/;/;/

    If i use OBD Delphi to connect with Engine ECU i can not even connect with it;/ ;/

    Should i find a full backoup of this ECU and write it or only flash?


    Greets
    Kuba

    Edit:
    Now I see Your post @mvekaz

    So i should flash it with Your file using KTAG >OPEL> PROTOCOL 7>> WRITE (not restore)>>EXTFLASH (Maps)

    And how to know if the ECU is alive then? I should start or it shout connect with diagnostic interface? Like OPCOM/DELPHI?


    And then rewrite it with mine?

    I have bought from:
    http://procardiag.com/

    the oryginal dump:
    Opel Astra 1.7CDTI 0281014643 1037390517.rar

    But when i try to write it on Flash then get the checksum ERROR
    Last edited by kubuswujo; 20th July, 2017 at 06:26 PM.

  7. #6
    DK Veteran

    Join Date
    Feb 2010
    Location
    Bosna
    Posts
    550
    Thanks Thanks Given 
    135
    Thanks Thanks Received 
    207
    Thanked in
    134 Posts

    Default

    Something is wrong with your bdm flash file, it is allmost same as your obd file. So friends please write file I sent you in attachment over bdm and see what will hapend.

  8. The Following User Says Thank You to mvekaz For This Useful Post:

    kubuswujo (20th July, 2017)

  9. #7
    DK Veteran

    Join Date
    Feb 2010
    Location
    Bosna
    Posts
    550
    Thanks Thanks Given 
    135
    Thanks Thanks Received 
    207
    Thanked in
    134 Posts

    Default

    Yes, maybe if soft ok car will start, if not try to make diagnostic with opcom.

  10. The Following User Says Thank You to mvekaz For This Useful Post:

    kubuswujo (20th July, 2017)

  11. #8
    DK Veteran
    Join Date
    Dec 2016
    Location
    Poland
    Posts
    339
    Thanks Thanks Given 
    199
    Thanks Thanks Received 
    31
    Thanked in
    25 Posts

    Default

    Hi my friend I have flashed your file and the cars STARTS!!!! Thank You very very much.

    As You said the problem was my old files :
    "OPEL Astra III 1.7 CDTi 2007.rar"

    but for 5 weeks i was using these files and they were ok.

    But now with your flash if I write my old files using MPPS then OPEL does not start.

    now i think that i will make a Chip using your flash and it will work fine.

    Thanks
    Kuba

  12. #9
    Junior Member
    Join Date
    Dec 2018
    Posts
    30
    Thanks Thanks Given 
    3
    Thanks Thanks Received 
    3
    Thanked in
    3 Posts

    Default

    i dont think you can use KESS to write a file in, unless possibly its the actual original file read 1st via BDM , as i just had same problem, & writing in via BDM some random file ( of same SW & HW ID) restored the program correctly & car runs again.

    Maybe once write fails, dta is missing from 1st half of flash, & only BDM can restore it. BDM files have data in 1st half of file. Some files downloaded from here do not.

  13. The Following User Says Thank You to green1 For This Useful Post:

    Manuelmanuel122 (22nd July, 2021)

 

 

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.