Renault Kangoo 1.4 immo off problem

[MHB2011]

Hi ,

My car wont start it looks like it cant read key code. Red lamp is blinking and it should not blink.
I am trying to do immo off .
I have read ECU using KESSV2 so here is original read file. In attachment
It is Renault Kangoo 2000yr 1.4 Gasoline 5gear manual Siemens Sirius 32 8200061272
Here is a photo of ECU http://imgur.com/wBA16cp

Any help is appreciated .

[dominik.m]

Need know- 8 or 16valve and with or without AC .

[MHB2011]

Need know- 8 or 16valve and with or without AC .

8 v without AC

[aandroma]

sirius32 1.4 8v no AC.rar

Try this dont forget to cut pin58

[albertros]

Hi,
just resolder the chip on the key board

[MHB2011]

sirius32 1.4 8v no AC.rar

Try this dont forget to cut pin58

I will try . Is it ok if i write it with kess v2 (obd2) ?

Hi,
just resolder the chip on the key board

What do u mean ?
I am doing this first time, i dont understand what i have to do.
Can u explain please ?

[vladanr]

kangoo ecu read off original.rar here you are,write this file and cut wire on pin 58 on engine ecu connector

[albertros]

What do u mean ?
I am doing this first time, i dont understand what i have to do.
Can u explain please ?


Open the key
find the rectangle large chip
resolder legs very carefully
check continuity on aerial, copper coloured long part

[Pyromaniak]

What do u mean ?
I am doing this first time, i dont understand what i have to do.
Can u explain please ?


Open the key
find the rectangle large chip
resolder legs very carefully
check continuity on aerial, copper coloured long part

yes, in most cases is problem here I have lot of renault repair with this method. Most peoples try if not work button in key much power to press it. Pcb bended and chip lost contact with pcb.