try to swap the eeprom from original SAM to new SAM
Hi friends
I have this MB ML 320 CDI W164 this car was in rain water leaking for month i had to change the SAM Passenger was oxidizing, after changing the module the car starts but fan goes into operation seconds later and at maximum speed, hazard light, wipper doesn?t work ... and Can not communicate With car by EOBD
In dash i have this menssage, display fault visit workshop, when try to navigate on dash i can saw, Instr SW1205 see 0089, HW 1505 A164 540 07 11, vin number WDC16412211A021091 in car i have diferent vin number and service display not possible etc ...
In Sam module i can saw eeprom atmel 25040 ..
I do not know exactally what caused this problem, if is only because i used a used SAM module or need some intervetion in
Suggestion please!!
Last edited by electrones; 18th September, 2017 at 05:17 AM.
Press "THANKS" button. just one click, CHEERS
try to swap the eeprom from original SAM to new SAM
electrones (21st July, 2017)
Hi friends
Changed gateway module and prob solved
Cheers
Press "THANKS" button. just one click, CHEERS
electromech (18th September, 2017), lush29 (11th September, 2017)
lush29 (18th September, 2017)
Bookmarks