Hi,
It would be easyier to write new virgin file and than program it with Clip.
If eprom is on top of pcb than this will work.
Hello all.
I replaced the power steering in Modus 2005, because the old DF002 error. After replacing everything worked fine until the battery was disconnected. Car does not work, immo blocks, error DF048 in UCH. Diagnosis with EPS is. Please adjust the file for the car to work. VIN: VF1JP0K0532790211
Old: 8200124412D
new: 8200826807A
Thank you in advancemodus_steering_8200826807A_24c16_df048.rar
Hi,
It would be easyier to write new virgin file and than program it with Clip.
If eprom is on top of pcb than this will work.
Eeprom is underneath the pcb.
Your file does not have a VIN number.
I have doubts whether your file will work.
Was it tested?
Hello my friend
DDT4ALL software can help you for free ( by OBD2 with simple ELM327 PIC25K80 )
https://mega.nz/#!vRk0xTyT!IhZcxV3gT...KWIz9T5dBjxY78
Connect to the car , open "DDT4ALL" command file , push button " Mode expert " (A smiley who pulls the tongue)
Select ECU / EPS > MODE FOURNISSEUR > push button "START DIAGNOSTIC FA" > CONFIGURATION > DONGLE > push button "RESET DONGLE_ID"
YES WE CAN !
This program does not work, it does not start. I still need help.
This program does not work, it does not start. I still need help.
Sorry 2 times I clicked
Last edited by kwansterp; 26th July, 2017 at 01:51 PM.
Bookmarks