My scanner live data session, shows the correct button readings when pressing Unlock, Lock and Panic. However none of those operation are executed by the physical locks/alarm. In other words, the remote and key are programmed but when I press the remote buttons nothing happens in the car. I plugged my scanner and went to the live data section and whenever I press a key the scanner identifies the right button pressed. This makes me assume that the remote is working, the antenna is receiving the signal and the immo is correctly identifying what button I am pressing.

Thanks in advance for any help or ideas.

I include some screenshots for reference, I would like to know what is keeping the actual locks from triggering, or the panic alarm to activate.


Sent from my iPhone using Tapatalk