but the dash looks like is dead now. when coneccting to the car is more like dead, nothing no led no lcd 0. u thing is because 93c76 chip?
but the dash looks like is dead now. when coneccting to the car is more like dead, nothing no led no lcd 0. u thing is because 93c76 chip?
after remving and putting back chip, all working better as before, can read can write . happy but we see for how long.
need km change to 65500 or around that 65475 etc. Also there is no option in Digiprog 3 changed km by writing the km in digiprog , maybe diffrent car but same chip?
i know eeprom is in 93C86. some how can save to pc from digiprog eeprom 93C76? pic showes C76 eeprom.ab.jpgabc.jpgabcd.jpg
Last edited by defected; 12th August, 2017 at 08:39 PM.
dump no good..................
Last edited by defected; 13th August, 2017 at 12:31 AM.
Ok 48 h later <br><br>Using enigma diagram on Digiprog you need to connect only 5 wires, do not connect green. Next - digiprog has no Outlander 93C76 but only c86V1 or C86V2 so, read eeprom orginal save it, then go to Outlander C86V2 read km , write what you want, then read again and just cope 4 lines to the orginal eeprom and write again to the speedo. In that way you will get from C86 new km (first 4 lines) and rewrite to the orginal those 4 lines and save it to the speed as 93C76 orginal but with 4 lines of numbers from 93C86V2.<br>Why was not working and was dead? dont know, wrong wire connection and some protecting fuse shutdown the system for some time? <br>Cheers
Last edited by defected; 14th August, 2017 at 12:16 PM.
onli wey its ok programing 93c86 lancer working 100%
defected (17th August, 2017)
didnt work for me. get some different lcd massages
if spanis put in d car oll ok engl cam back
Bookmarks