edc16u1 bdm

[coder5]

Hello
I am trying to do a bdm read on a edc16u1 golf 5 using galleto v54.
It will read the flash and micro ok but not the eeprom
which is a 95320.There is no problem with the eeprom
as i removed it and read it on the bench. I can communicate with
ecu using scan tool but there is no engine managment or glowplug
light and car wont start.I also reflashed the flash chip with original
flash file.I would be grateful for any help.
Thanks
Larry.

[broo111]

You need full read whith BDM 100

[smirnoff_rules]

l have replaced these ecu's afew time , very common to become faulty

do a full scann on all modules and if abs dosnt see ecu then ecu is faulty