POLO tdi ECU swap

[Rike]

Hi all
I have a polo 1.4 tdi ecu burned.
the car wont start and there are some capacitors burned on the pcb.
I read the 24c04 from this ecu and flash another one from an ibiza 1.4 tdi with the Polo file.
Now the car works fine but i have a glow plug flashing and several errors:
VW-18020/P1612
VW-18045/P1637
VW-18263/P1855
VW-18043/P1635
I think i need to adapt the new ECU to the car
The pin from the original ECU is 5404
someone can convert to the 7 digit pin ?

thanks in advance.

[teefyg1]

Its because you are not using same Ecu Part Number. Original Eeprom data conflicts with Flash data in Donor Ecu. Solder across 29F400 flash to donor or just make Donor Immo Off.

[Rike]

teefyg1, thanks for the info.
i'll try to flash the 29F400 with the original data and see what happens.