Put Your our file to compare.
Wysłane z iPhone za pomocą Tapatalk
Hello guys, I have such a problem, I have tuning software in my car, I did it. The car always starts to gently sink, pulsate with power whenever the speed and full throttle subsides. EGR OFF, swirl removed, DPF OFF. I tried to disconnect the weight of the air, to replace the MAP sensor and it still takes. Does anyone have experience ?
Thanks!
Put Your our file to compare.
Wysłane z iPhone za pomocą Tapatalk
Chiptuning - Diesel / Petrol / Stage1,2,3 / HIGH Petrol Tuning
DSG TUNING
DPF / EGR / TVA / SAI / Lambda
Crackle map ( Launch Control + No lift Shift + Antilag )
File Service
PCMFLASH / BFLASH / AMT BST / AMT MPPS / TGFLASH / BITBOX / EDCSUITEPRO - Genuine USER
Here ORI software
I think the problem is at 1C1AFC.
No no, that's launch control ...
Last edited by dragocz; 6th September, 2017 at 06:08 PM.
corrected file... problem was your torque limiter..
no pass.
use thanks and rep button if i helped.
Chiptuning - Diesel / Petrol / Stage1,2,3 / HIGH Petrol Tuning
DSG TUNING
DPF / EGR / TVA / SAI / Lambda
Crackle map ( Launch Control + No lift Shift + Antilag )
File Service
PCMFLASH / BFLASH / AMT BST / AMT MPPS / TGFLASH / BITBOX / EDCSUITEPRO - Genuine USER
dragocz (6th September, 2017)
Please, what was the problem with the torque limiter?
Chiptuning - Diesel / Petrol / Stage1,2,3 / HIGH Petrol Tuning
DSG TUNING
DPF / EGR / TVA / SAI / Lambda
Crackle map ( Launch Control + No lift Shift + Antilag )
File Service
PCMFLASH / BFLASH / AMT BST / AMT MPPS / TGFLASH / BITBOX / EDCSUITEPRO - Genuine USER
The TQ limiter you have modified is only at idle, ie. when neutral is included.
May be 1CC1B0 increase is needed if you want to inject 90 mm3?
Turbo pressure is high for stock turbo.
Stock turbo is bv50.
Bookmarks