Try to use some transponder programmer what you have !
Upload you dump and add blank transponder what need and select writhe transponder for MB and need to work !
Try to use some transponder programmer what you have !
Upload you dump and add blank transponder what need and select writhe transponder for MB and need to work !
Last edited by Seby_TM; 13th September, 2017 at 10:54 PM.
it will not work if not close the transponder properly i need config data construction and add manually the key please help and check for me if there is any keys know in that dump
I check you dump and you have inside 3 key stored !
You need write to our friend adikk to get help from him.
Be polite. No Thanks + Rep, no HELP!!! Slava Ukcraine. Dead Putler civilians's killers!!!
Sorry of delay, only now I return to work.
You have 3 used key (1-3), I send 1,4,7 keys. Try write 1 or 7 to new chip and config its as in .txt. And Your upload key very similar to key#4 !?! May be try check pass of 4-s key and rewrite key (If pass true - its possible. You dont can reset pass but can write new data).
Key for dudul:
You have 2 used key (1,2)
write chip and config its as in .txt
dudul (22nd November, 2017)
hi
i need transponder data for this dump w168 1d69j,please
regards
Hello,
Can Anybody check for me this dump ,it form mb slk 1d69j immo box,
I remove immo box and dash and put it back and after that car never start. Any help will be appreciated.
If I help you dont forget to push thanks button
Hello!
I have a mercedes W168 with lost keys. Can you help me to close the transponder? File is read with Xprog. I try to make transponder with Tango but doesn t work.
Thank you!
Tango wary well work of its car (if You have keymaker) - not need any change in chip. May be You have other trable - not in key? What You see of diagnose?
P.S. info about config PCF I send for You year ago
P.P.S. But not have any answer
P.P.P.S Mary Christmas!!!
Last edited by adikk; 27th December, 2018 at 05:22 PM.
droidwayne65 (27th December, 2018)
hi, this one is from another car. I solved the one before with what you had sent me.(Tango didn't help me in the past with this model) If you can send me the config for closing this transponder, I would very much appreciate! Thanks
Bookmarks