Your cleared tested file, pass in pm.
Your cleared tested file, pass in pm.
You use srs units files at your own risk. I am not responsible for any damages. Don't ask about passes, one file=one pass.
If I helped, please, use magic buttons reputation+thanks.
Best regards.
Dragon
I have dtc B0090-87 and B0095-87 front impact sensors.. are their broken or crash is not cleared? wiring from sensors to module is ok
I think so sensors are broken ...
You use srs units files at your own risk. I am not responsible for any damages. Don't ask about passes, one file=one pass.
If I helped, please, use magic buttons reputation+thanks.
Best regards.
Dragon
repairmymodule (23rd September, 2017)
You can always check crash with scan tool. Read Data stream, select all Front and Side Impact PIDs, if all display OFF then no crash.
dragon100 (23rd September, 2017)
impact sensors are ok. I checked in another honda. I attach screens of data stream and dtc.IMG_0832.JPGIMG_0833.JPG
repairmymodule (24th September, 2017)
Check this, if not work, you need use diviner ...
You use srs units files at your own risk. I am not responsible for any damages. Don't ask about passes, one file=one pass.
If I helped, please, use magic buttons reputation+thanks.
Best regards.
Dragon
may be impact sensor ...use vin number check impact sensor is correct or no....normally clear crash file,no have code impact sensor...if part number correct need try check wiring impact sensor ,try ur best
Can someone help me with check correct number of front impact sensors? Now i have 77930-t1g-a010-M4.. car is after crash and i think that somebody repaired and install wrong impact sensors.. i was changing sensors to the same number and i still get dtc. Sides impacts have 'M1' tag.
vin number: 2HKRM4H35GH663840
Bookmarks