conection MPPS V18 to zafira Y2.2DTR PSG16

**osobuque1** · 9th October, 2017, 12:41 PM

Hello,
Sorry for my English, but.
Somebody can say me, how can i need conect the MPPS V18 to the PSG16 to read ECU for remap?

the color of wires i need conect, between the MPPS and the wires of near the batery.

**johak** · 9th October, 2017, 12:53 PM

look at this
http://blog.eobdtool.co.uk/faq-mpps-...esel-pump-ecu/

**tiugrikas** · 9th October, 2017, 05:05 PM

here you go mate made by myself its really easy just find can wires in the loom near the battery they are green and white in black pvc ,good luck mate

**osobuque1** · 10th October, 2017, 02:25 PM

I only need to take the black thick wire, cut and connect the MPPS wires?

in the black thick wire the Green wire is CAN H and the White wire is CAN L?

I need cut all the wire, or only doing a small hole in the green and white cables to connect the wires it´s ok?

**tiugrikas** · 11th October, 2017, 05:36 PM

personally i cut wires without cutting wires i didnt try yet .and yes white and green wires for can

**osobuque1** · 5th November, 2017, 10:48 AM

Finaly i didn’t need cut all the wires, only doing a small hole in the wires to conect the MPPS it’s ok.

**osobuque1** · 6th November, 2017, 11:57 PM

somebody can say me, what happened with my readed file?
I think is not all the ECU is readed.
55352863.rar
I´m trying to read with the MPPS V21, but something is wrong.

thanks

**carbon7319** · 7th November, 2017, 10:49 AM

Why you think that is not readed ok ?

**maajkii** · 7th November, 2017, 10:52 AM

We try to tune it, but its missing few maps..

**mancioks** · 9th November, 2017, 06:38 AM

what maps missing?

**osobuque1** · 17th November, 2017, 05:57 PM

hi,
I get some files remaped from one vectra bertone Y2.2DTR, and PSG16, but I open the files and the maps there aren´t in the same place like in my readed file.
I know isn´t good to write in my car the file from other car.
What can I do to check that file and transform for my car?

**mancioks** · 17th November, 2017, 06:33 PM

Originally Posted by osobuque1

hi,
I get some files remaped from one vectra bertone Y2.2DTR, and PSG16, but I open the files and the maps there aren´t in the same place like in my readed file.
I know isn´t good to write in my car the file from other car.
What can I do to check that file and transform for my car?

Take yours file and modified one and compare them in winols

Put modifications to your file and write

**osobuque1** · 17th November, 2017, 06:56 PM

I compare the first map and in the driver wish the range is not the same, in x i have the range since 82 till 8192 and the remaped have since 0 till 10000. Can I cange this parameters?, because when i´m going to change the winols alert me saying "Protected area is being changed the contents of the 0X820A is to be changed, every though this address is not be covered by any checksum áreas.

Can I change, without problems them writing?

may be i can change only the map parameters, but not the memory place in the ecu?

**smirnoff_rules** · 17th November, 2017, 07:30 PM

wonder if your problem was not cutting the can wires and you didnt get full read ?

**mancioks** · 17th November, 2017, 08:57 PM

Originally Posted by osobuque1

I compare the first map and in the driver wish the range is not the same, in x i have the range since 82 till 8192 and the remaped have since 0 till 10000. Can I cange this parameters?, because when i´m going to change the winols alert me saying "Protected area is being changed the contents of the 0X820A is to be changed, every though this address is not be covered by any checksum áreas.

Can I change, without problems them writing?

may be i can change only the map parameters, but not the memory place in the ecu?

You can change the axis, but after all you have to do checksum. If u use mpps18 it should do it for you.